Belkin Network Router F5D7230 4 User Manual

Wireless Cable/DSL  
Gateway Router  
Share your broadband Internet connection  
without cables  
Quick Installation Guide  
F5D7230-4  
 
Follow the Easy Install Wizard to  
Complete the Installation  
Connect the Router to your  
Modem and Computer  
Connecting and Configuring your Wireless Router  
Run the Easy Install Wizard Software  
1
2
3
Verify the contents of your box. You should have the following:  
54g Wireless Cable/DSL Gateway Router  
Vertical Mounting Base (optional use)  
Category 5 Networking Cable (for connection of the Router to the computer)  
Power Supply  
Belkin Easy Install Wizard Software CD  
User Manual  
Click on “Set Up the Router” to begin.  
The Wizard will ask you to connect your Router. Follow the steps on the  
screen, or do the following:  
IMPORTANT: Run the Easy Install Wizard from the computer that is  
directly connected to the cable or DSL modem. DO NOT CONNECT THE  
ROUTER AT THIS TIME.  
1. Turn off the power to your modem by unplugging the power supply  
from the modem.  
2. Locate the network cable that is connected between your modem and  
your computer and unplug it from your computer, leaving the other  
end connected to your modem.  
1. Shut down any programs that are running on your computer at  
This Quick Installation Guide  
this time.  
2. Make sure you have the following items at the computer that is now  
directly connected to the cable or DSL modem. DO NOT CONNECT THE  
ROUTER AT THIS TIME.  
Modem Requirements  
3. Plug the loose end of the cable you just unplugged into the port on  
Your cable or DSL modem must be equipped with an RJ45 Ethernet port.  
Many modems have both an RJ45 Ethernet port and a USB connection. If  
you have a modem with both Ethernet and USB, and are using the USB  
connection at this time, you will be instructed  
to use the RJ45 Ethernet port during the  
installation procedure. If your modem has  
the back of the Router labeled “Internet/ WAN”.  
4. Connect the new network cable from the back of the computer to one  
of the ports labeled “1–4. Note: It does not matter which numbered  
port you choose.  
The Easy Install Wizard CD-ROM  
The Router  
The Router power supply  
Category 5 networking cable  
This Quick Installation Guide  
Computer that was originally connected to  
the cable or DSL modem  
only a USB port, you can request a different  
Ethernet  
USB  
type of modem from your ISP, or you can, in  
some cases, purchase a modem that has an  
RJ45 Ethernet port on it.  
3. Turn off any firewall or Internet connection sharing software on  
New network cable  
(to computer)  
your computer.  
Easy Install Wizard  
Belkin has provided our Easy Install Wizard software to make installing  
your Router a simple and easy task. You can use it to get your Router up  
and running in minutes. The Easy Install Wizard requires that your  
Windows® 98, Me, 2000, or XP computer be connected directly to your  
cable or DSL modem and that the Internet connection is active and  
working at the time of installation. If it is not, you must use the  
“Alternative Setup Method” section of the User Manual to configure your  
Router. Additionally, if you are using an operating system other than  
Windows 98, Me, 2000, or XP, you must set up the Router using the  
“Alternative Setup Method.  
4. Insert the Easy Install Wizard software CD into your CDROM drive.  
The Easy Install Wizard screen will automatically appear on your  
screen within 15 seconds. If it does not, select your CD-ROM drive  
from “My Computer” and double-click on the file named “Setup” on  
the CD-ROM.  
To power  
adapter  
Cable or  
DSL modem  
Existing network cable  
(that came with modem)  
 
Connect the Router to your  
Modem and Computer contd.  
Continue Following the Wizards Instructions  
4
3
5. Turn on your cable or DSL modem by reconnecting the power supply to  
The Wizard will take you through the completion of the process.  
the modem.  
6. Before plugging the power cord into the Router, plug the cord into the  
wall, then plug the cord into the Routers power jack.  
belkin.com  
7. Verify that your modem is connected to the Router by checking the  
lights on the front of the Router. The green light labeled “WAN” should  
be ON if your modem is connected correctly to the Router. If it is not,  
recheck your connections.  
Belkin Corporation  
501 West Walnut Street  
Compton • CA 90220 • USA  
Tel: 310.898.1100  
Fax: 310.898.1111  
8. Verify that your computer is connected properly to the Router by  
checking the lights labeled “LAN 1,2,3,4. The light which corresponds  
to the numbered port that you connected your computer to should be  
ON if your computer is connected properly.  
Belkin Components, Ltd.  
Express Business Park  
Shipton Way • Rushden • NN10 6GL  
United Kingdom  
Tel: +44 (0) 1933 35 2000  
Fax: +44 (0) 1933 31 2000  
Belkin Components B.V.  
Starparc Building • Boeing Avenue 333  
1119 PH Schiphol-Rijk • The Netherlands  
Tel: +31 (0) 20 654 7300  
Begin Surfing!  
5
Fax: +31 (0) 20 654 7349  
Congratulations! You have finished installing your new Belkin Router.  
Belkin, Ltd.  
7 Bowen Crescent • West Gosford  
NSW 2250 Australia  
Tel: +61 (0) 2 4372 8600  
Fax: +61 (0) 2 4372 8603  
Belkin Tech Support  
US: 310.898.1100 ext. 2263  
800.223.5546 ext. 2263  
Europe: 00 800 223 55 460  
Australia: 1800 666 040  
P74223  
© 2003 Belkin Corporation. All rights reserved. All trade names are  
registered trademarks of respective manufacturers listed.  
 

Blanco Dishwasher BID11 User Manual
Blaupunkt Car Stereo System CD70 User Manual
BMW Automobile 635CSi User Manual
Braun Electric Toothbrush D 9513 User Manual
Briggs Stratton Portable Generator 40248 User Manual
Bush Hog Lawn Mower CZ2149 User Manual
Campbell Hausfeld Air Compressor IN630101AV User Manual
Canon Camcorder ZR30MC User Manual
Carver Stereo Amplifier PM 200 User Manual
Centro Gas Grill 85 1620 6 User Manual