Blaupunkt Car Stereo System RD 104 User Manual

Operating instructions  
Kiel RD 104  
 
Contents  
CD operation ................................. 26  
Radio operation with RDS ........... 22  
Short description.......................... 17  
Inserting the disc ................................... 26  
REG - Regional ..................................... 22 Ejecting the disc .................................... 26  
Selecting a station................................. 23 Selecting a track /  
AF - alternative frequency ..................... 22  
Important information .................. 20  
What you need to know! ....................... 20  
Traffic safety ......................................... 20  
Installation/connection .......................... 20  
Automatic seek tuning........................... 23 Cueing and reviewing ........................... 26  
Sampling tracks automatically with  
Manual seek tuning ............................... 23  
Adjusting the seek tuning sensitivity ..... 23  
Stereo - mono switch (FM).................... 23  
Changing the memory bank (FM) ......... 23  
Storing stations ..................................... 23  
Storing the strongest stations auto-  
matically with Travelstore...................... 24  
Recalling stored stations ....................... 24  
Sampling stored stations briefly with  
CD SCAN .............................................. 26  
The Mix function.................................... 26  
Changing the audio source with SRC ... 26  
Anti-theft coding........................... 20  
Wrong code number entered ................ 20  
Switching the code system on .............. 21  
Restart following interruption of power  
supply.................................................... 21  
Switching the code system off .............. 21  
Optical indication of theft protection ...... 21  
DSC programming........................ 27  
Survey of DSC default settings ............. 28  
Appendix ....................................... 28  
Technical data....................................... 28  
Preset Scan .......................................... 24  
Sampling stations briefly with  
Radio Scan ........................................... 24  
Reception of traffic announcements  
with RDS-EON............................... 25  
Priority of traffic announcements  
ON/OFF ................................................ 25  
Warning beep........................................ 25  
Switching the warning beep off ............. 25  
Automatic seek tuning start................... 25  
Adjusting the traffic message and  
warning beep volume ............................ 25  
16  
 
Short description  
2 VOL+ / VOL-  
ry by pressing the -dB button for about  
2 seconds (beep tone is released).  
This volume will then be stored as the  
mute volume.  
1 ON  
Adjust the desired volume with VOL+ /  
VOL-.  
Each time the set is switched on, it will  
play with the pre-adjusted volume. You  
may also change this setting (see chap-  
ter “DSC programming - VOL FIX”).  
Switching on:  
Press ON, the set plays with the pre-  
adjusted volume. You may also change  
this setting (see chapter “DSC pro-  
gramming - VOL FIX”).  
When “CODE” lights up in the display,  
read chapter “Anti-theft coding” first.  
Switching off:  
Press ON for approximately 1 second.  
The set may also be turned off via the  
vehicle’s ignition (provided that it was  
connected correspondingly).  
To operate the set when the ignition is  
switched off, proceed as follows:  
Press ON after the ignition was swit-  
ched off. The set will be turned on.  
To protect the battery, the system will  
automatically shut off after a playing  
time of one hour.  
6 Rocker switch  
Station search  
3 FM  
up  
To select one of the FM memory banks  
I, II.  
down in short  
intervals  
up in short  
intervals  
4 TS (Travelstore)  
To store the six most powerful stations  
automatically with Travelstore:  
Store: Press TS until seek tuning starts  
(see display).  
Recall: Press TS. Then briefly press  
one of the presets 1, 2, 3, 4, 5, 6.  
(when AF is off)  
(when AF is off)  
down  
Extra functions:  
Track  
/
:
To select the title  
(upwards/down-  
wards)  
5 -dB  
Press the -dB button to instantly mute  
the audio source. The display will then  
show “MUTE”. Return to normal volume  
by pressing either the -dB button once  
again or the VOL+ / VOL- button.  
To program the mute volume, proceed  
as follows:  
Volume +  
CD  
:
Cue/review  
Switching on/off  
Volume  
In the DSC mode: Select function and  
program parameter.  
In the AF mode: (“AF” in the display)  
Use <</>> to scroll  
through the pro-  
grams of a radio  
Adjust the desired volume with the  
VOL+ / VOL- button. Confirm your ent-  
17  
 
network, e.g. from  
NDR1 to NDR4  
(North German  
broadcaster) or to  
display the entire  
AF memory.  
: LD  
Loudness - boosts bass at low volume.  
Extra function:  
REG ON/REG OFF - With REG ON,  
the radio only switches to a better alter-  
native frequency, if it offers the same  
regional program (see “REG - Regio-  
nal”).  
Loudness on/off: Press LD.  
For more information see chapter “DSC  
programming”.  
; PS (Preset Scan)  
7 Display  
Radio function:  
> lo  
Press PS briefly - the system will briefly  
play all stations stored on the preset  
buttons.  
To change the seek tuning sensitivity.  
“lo” lights up in the display - normal  
seek tuning sensitivity (the system will  
pick up all powerful, nearby stations).  
“lo” does not light up - high seek tuning  
sensitivity (the system will also pick up  
weaker stations).  
Radio operation  
Station name  
(NDR1 NDS)  
Memory bank (FM I)  
Press PS longer than 2 seconds - the  
system will briefly play all FM stations  
to be received.  
CD function:  
To sample the CD titles.  
To start or stop: Press PS briefly.  
CD operation  
In the DSC mode you  
can choose between  
the CD PLAY or play-  
back time indication.  
To change the seek tuning sensitivity:  
Press lo briefly.  
Extra function:  
Switching from stereo to mono: Press  
lo longer than 2 seconds.  
< TA (priority for traffic announcements)  
When “TA” lights up in the display, the  
system will only play stations offering  
traffic information.  
8 LED warning light (code-LED)  
Flashes as additional anti-theft protec-  
tion when the car radio is turned off  
(see chapter “DSC programming - LED  
ON”).  
TA on/off: Press TA.  
?
/ SRC (Source)  
Press the button briefly - to select bet-  
ween the audio sources, radio and CD.  
Press the button longer than 1 second -  
to eject the CD.  
= AF (alternative frequency in RDS ope-  
ration)  
When “AF” lights up in the display, the  
system will automatically seek a fre-  
quency offering better reception of the  
same RDS program.  
9 MIX  
Press MIX - all CD titles will then be  
played at random.  
AF on/off: Press AF briefly.  
18  
 
@ 1, 2, 3, 4, 5, 6 - preset buttons  
You can store 6 stations on each FM  
memory bank (I, II, and “T”).  
C GEO  
To adjust the balance (left/right) and  
D AUD  
To adjust the treble and bass frequen-  
fader (front/rear) using the rocker  
switch.  
cies using the rocker switch.  
To store a station: Press button during  
radio operation and hold down until the  
radio resumes play.  
To recall a station: Select the desired  
memory bank by pressing FM. Then  
press the corresponding preset button.  
Treble  
+
Fader front  
Bass  
+
Bass  
Extra function:  
Coding: Read chapter “Anti-theft cod-  
ing” first.  
Balance  
left  
Balance  
right  
Buttons 1, 2, 3, 4 - To enter the four-  
digit code.  
Treble  
Press each button repeatedly until the  
four-digit code given in the car radio  
passport is displayed.  
Fader rear  
The last setting will be automatically  
stored.  
If the setting remains unchanged within  
8 seconds, the display will show the  
previous status.  
The last setting will be stored automati-  
cally.  
If the setting remains unchanged within  
8 seconds, the display will show the  
previous status.  
A CD slot  
Insert the CD with the label side  
showing to the top. The system will  
switch from radio to CD operation.  
B DSC (Direct Software Control)  
Use the DSC function to adapt a num-  
ber of programmable basic settings to  
your personal needs.  
For more information, read through  
chapter “DSC programming”.  
19  
 
Important information  
Anti-theft coding  
Do not connect the loudspeaker outputs to  
ground!  
Only use the accessory and replacement  
parts approved by Blaupunkt.  
The car radio comes standard with the code  
system deactivated.  
What you need to know!  
Before starting to use your new car radio you  
shouldcarefullyreadthroughtheinformation  
on “Traffic safety” and “Anti-theft coding”.  
If the anti-theft coding system is on while the  
power supply to the unit is interrupted (e.g.  
theft,disconnectingthecarbattery),thesetis  
electronically blocked. Then it may only be  
used again after the appropriate code num-  
ber has been entered (see car radio pass-  
port).  
Traffic safety  
Traffic safety has always priority. Use your  
car radio in such a manner that you are  
always able to cope with and react to the  
prevailing traffic situation at any given time.  
Remember, even at 50 km/h you are still  
moving at a speed of 14 m per seconds.  
It is also very important that you are able to  
hear, and react to, acoustic warning signals  
around you, for example from the police or  
the firebrigade.  
Wrong code number entered  
It should not be possible for thieves to ascer-  
tain the code number by trial-and-error. This  
is why the set will be blocked for a certain  
period of time, if an incorrect code number is  
entered. Inthiscase, “- - - -willappearinthe  
display.  
This waiting time is 10 seconds after the first  
three attempts, and 1 hour following subse-  
quent attempts.  
Therefore, adjust the volume reasonably.  
Installation/connection  
After 19 unsuccessful attempts, “OFF” will  
appear in the display and the set can no  
longer be restarted.  
The code system can only be switched on  
and off, if the radio is connected to perma-  
nent power.  
If you like to install your new car radio by  
yourself or add other audio components to  
the existing ones, then please read carefully  
the enclosed instructions on installation and  
connection.  
Note:  
Keep you car radio passport with the code  
number in a safe place in order to avoid  
“unauthorized access” to your car radio.  
20  
 
If the power supply to the radio is interrupted  
while the code system is switched on, you  
need to know the right code number.  
The radio will operate again as soon as you  
have entered the right code number.  
If you lose your radio passport and have  
forgotten your code number, you will not be  
able to restart the set after the power supply  
has been interrupted. In this case, your radio  
can only be reset in our central customer  
service workshop or in one of our service  
agencies abroad.  
If the radio is turned off before the waiting  
period has elapsed, then the waiting period  
restarts as soon as the radio is turned on  
again.  
Restart following interruption of  
power supply  
(Code system switched on)  
Switch on the set.  
“CODE” will appear in the display.  
Switching the code system off  
Briefly press preset button 1, “0000” will  
appear in the display.  
Turn off the radio.  
Simultaneously press preset buttons 1  
and 4 and hold them down.  
Enter the code number given in the  
Blaupunkt car radio passport:  
Turn the set on.  
“CODE” will appear in the display.  
Example: the code number is 2521.  
- Press preset button 1 twice, “2000”  
appears in the display.  
- Press preset button 2 five times,  
“2500” appears in the display.  
- Press preset button 3 twice, “2520”  
appears in the display.  
Enter the code number given in the  
Blaupunkt car radio passport and con-  
firm: See example “Restart following  
interruption …”.  
Switching the code system on  
Precondition:  
The radio must be connected to permanent  
power.  
The code system is now deactivated.  
- Press preset button 4 once, “2521”  
appears in the display.  
In order to switch the code system on:  
Turn the radio off.  
Optical indication of theft protec-  
tion  
To confirm the code number:  
Press the upper part of the rocker  
Hold down the preset buttons 1 and 4  
simultaneously.  
switch  
.
When the car is parked, you can let the LED  
warning light flash in order to show that the  
set is theft-protected.  
DSC allows you to adjust two different set-  
tings: LED ON or LED OFF.  
Turn the radio on.  
“CODE” briefly appears before the ra-  
dio begins to operate.  
Your car radio is now ready for operation.  
If four dashes appear again in the display,  
you have entered a wrong code number.  
Now it is essential to enter the correct code  
after the waiting period has elapsed (CODE  
in the display).  
Release preset buttons 1 and 4.  
The code system is on.  
“CODE” will be briefly displayed each time  
the radio is turned on.  
For more information, please read through  
chapter “DSC programming - LED ON”.  
21  
 
Radio operation with RDS (Radio Data System)  
To make radio reception even more conven-  
REG - Regional  
AF - alternative frequency  
ient, an ever increasing number of FM radio  
The AF function can also be used to activate  
and deactivate the regional function.  
At some times of the day, larger radio stati-  
ons split up their main program into regional  
program versions offering local information.  
If you want the radio to lock onto a regional  
program,  
The AF function makes sure that the stron-  
stations broadcast additional information in  
gest frequency of the selected program is  
parallel with their normal program via the  
always tuned in automatically.  
Radio Data System.  
This function is activated if “AF” lights up in  
the display. You can then use the << / >>  
rocker switch to scroll through the programs  
Assoonasaradioprogramcanbeidentified,  
thestationnameandpossiblyalsoaregional  
identifier will appear in the display, e.g.  
of a radio network, e.g. from NDR1 to NDR4  
“NDR1 NDS” (local radio program in Lower  
Saxony, Germany).  
With RDS, the preset buttons turn into pro-  
gram buttons. Now you know exactly to  
(NorthGermanbroadcaster)ortodisplaythe  
entire AF memory.  
To switch AF on/off:  
hold down the AF button for about 2  
seconds.  
The display will show “REG ON”.  
Press AF briefly.  
absolutely easy to find the desired station During seek tuning for the frequency offering  
quickly. the best reception of the selected program,  
But RDS even offers you more advantages: the radio is muted for a moment.  
If “SEARCH” appears in the display when  
If you leave the service area of the regional  
station tuned in, or if you wish to use the  
entire RDS service again, switch to “REG  
OFF”.  
which program your set is tuned in, making it  
Hold down the AF button for about 2  
turning on the set or when calling up one of  
the stored frequencies, the set is automati-  
cally searching for an alternative frequency.  
“SEARCH” goes out as soon as the system  
has found an alternative frequency or after  
the frequency band has been scanned com-  
pletely.  
seconds until “REG OFF” is displayed.  
If “REG ON” is activated, the display will  
show “REG ON” each time the radio is swit-  
ched on.  
Should the reception quality of the selected  
program become too bad,  
tune into another program.  
22  
 
Adjusting the seek tuning sensi- Changing the memory bank (FM)  
Selecting a station  
tivity  
This set allows you to receive FM stations  
between 87.5 and 108 MHz.  
You can shift between the memory banks I  
and II to store and recall preset stations.  
Theselectedmemorybankisindicatedinthe  
display.  
The set allows you to modify the seek tuning  
sensitivity.  
For this:  
Automatic seek tuning  
Press . The radio will automatically  
tune into the following station.  
If you keep the upper or lower part of the  
rocker switch depressed, seek tuning  
/
Press FM until the desired memory  
bank lights up in the display  
Press lo briefly.  
/
If “lo” is indicated, the radio will only pick up  
strong stations (low sensitivity).  
(press repeatedly if necessary).  
If “lo” is not indicated, the radio will also pick  
up less powerful stations (higher sensitivity).  
The degree of sensitivity can be separately  
adjusted for both levels (see chapter “DSC  
programming”).  
/
speeds up in upwards or downwards direc-  
tion.  
Storing stations  
Using the preset buttons 1, 2, 3, 4, 5, 6 you  
can store six stations on each FM memory  
bank (I, II, T).  
up  
Select FM or TS and with FM also the  
desired memory bank.  
Stereo - mono switch (FM)  
down in short  
intervals  
(when AF is off)  
up in short  
intervals  
(when AF is off)  
You can switch to mono when the reception  
quality becomes poor:  
Use the rocker switch to tune to a stati-  
on (either automatically  
/
or ma-  
Press lo for approximately 2 seconds.  
nually << / >> ).  
During mono reception the stereo sym-  
Press the desired preset button and  
hold it down. The radio will be muted  
and resumes play after approximately 2  
seconds. The system will also send out  
a beep tone.  
down  
bol  
in the display will go out.  
Each time the car radio is switched on, the  
radio will be automatically set to stereo  
reception.  
It will automatically switch to mono when the  
reception quality becomes poor.  
Manual seek tuning << / >>  
(prerequisite: AF is switched off!)  
Press << or >> to change the frequency  
in small steps in upwards/downwards  
direction.  
Now the station is stored.  
The activated preset button is indicated in  
the display.  
Hold down the right or left part of the rocker  
switch to speed up this procedure.  
23  
 
To continue listening to a sampled sta-  
tion/switch Radio Scan off:  
Sampling stored stations briefly  
with Preset Scan  
Storing the strongest stations  
automatically with Travelstore  
Briefly press PS.  
Use the Preset Scan function to briefly sam-  
ple all stations stored under FM or TS.  
You can use the Travelstore memory bank to  
automatically store the six strongest FM sta-  
tions sorted on the preset buttons according  
to their signal strength. This feature is espe-  
cially useful when travelling, because it will  
alwaysgiveyouthemostpowerfulstationsat  
a fingertip as you pass through the various  
reception areas.  
If no station is selected during the search  
operation, the scan function will be automa-  
tically switched off after the entire frequency  
band has been passed through. The radio  
will then return to the initial station that was  
being played when the scan function was  
activated.  
Press FM or TS.  
Press PS,  
the set will then sample all the stored  
stations, with FM on all memory banks.  
Free preset buttons will be skipped.  
To switch off Preset Scan:  
For more information, please also refer to  
chapter “DSC programming - SCANTIME”.  
Press TS for at least 2 seconds.  
Press PS once again.  
The radio will seek the most powerful FM  
stations and store them on the “T” memory  
bank (Travelstore). As soon as this procedu-  
rehasfinished, thefirststationwillbeplayed.  
FM stations can also be stored manually on  
the Travelstore memory bank (see “Storing  
stations”).  
The system will continue to play the  
currently sampled station.  
Sampling stations briefly with  
Radio Scan  
Startingwiththecurrentlyplayedstation, you  
mayletthesystemsamplethefollowingones  
one after another.  
Recalling stored stations  
To activate Scan:  
You can recall any stored station by pressing  
the corresponding preset button.  
Press PS for about 2 seconds.  
The sampled frequency or the station  
name starts flashing in the display.  
During the actual search process,  
“SCAN” is flashing.  
Select FM or TS and with FM also the  
desired memory bank.  
For this purpose, press FM until the  
desired memory bank is indicated on  
the display.  
Briefly press the corresponding preset  
button.  
24  
 
Reception of traffic announcements with RDS-EON (Enhanced Other Networks)  
Many FM broadcasters provide their service  
area with traffic messages at regular inter-  
vals.  
All traffic program stations transmit a special  
telegram signal in addition to the radio pro-  
gram, which is recognised and decoded by  
the car radio. As soon as such a signal is  
received, the display shows “TP” (Traffic  
Program).  
Other radio stations do not air traffic an-  
nouncements by themselves, but offer the  
possibility to receive the traffic announce-  
ments of another station within the same  
radio network. In this case, “TP” will light up  
in the display as soon as the priority for traffic  
announcements is activated. The display  
must then show “TA”.  
If a traffic announcement comes in, your  
radio will automatically switch to the traffic  
program for the duration of the message and  
return to the previous station after the end of  
the message.  
Alternative:  
Priority of traffic announcements  
ON/OFF  
b) Switch the priority of traffic announce-  
ments off:  
If the priority of traffic announcements is  
activated, “TA” lights up in the display. To  
switch the function on/off:  
Press TA.  
In the display, the “TA” indication goes out.  
Press the TA button.  
Automatic seek tuning start  
(CD operation)  
When pressing TA while a traffic announce-  
ment is being played, the radio stops playing  
the message and switches to the previous  
mode. The priority for all subsequent an-  
nouncements remains active.  
If you leave the reception area of your traffic  
program while you are listening to a CD, the  
car radio will automatically tune into another  
traffic program station.  
If no such traffic program station is found  
within approximately 30 seconds, CD repro-  
duction will be interrupted and you will hear a  
warning beep. To switch off the warning  
beep, proceed as detailed above.  
Warning beep  
Whenever you leave the reception area of  
the traffic program station you have tuned  
into,youwillhearawarningbeepafterappro-  
ximately 30 seconds.  
Thiswarningbeepwillalsobereleasedwhen  
pressing a preset button without traffic Adjusting the traffic message  
program.  
and warning beep volume  
The traffic message and warning beep volu-  
me is adjusted at the factory. However, you  
can change this default setting using the  
Switching the warning beep off  
a) Tune to another traffic program station:  
Press the rocker switch 6, or  
DSC function (see “DSC programming - TA  
LEVEL”).  
press a preset button with a station  
offering traffic information.  
25  
 
CD operation  
The rocker switch is designed as a sequence  
switch, i.e. several tracks can be skipped at  
a time by pressing it repeatedly. The display  
shows “T” (track) and the corresponding  
number of the currently selected track.  
Inserting the disc  
The Mix function  
When the Mix function is activated, the CD  
tracks will be played at random. The display  
will then show “MIX”. To skip a title, press  
Switch on the set.  
Insert the CD (label side facing up) wi-  
thout applying force.  
rocker switch  
To switch Mix function on and off:  
Press the MIX button.  
.
Thediscisautomaticallypulledintothesetto  
reach the playing position. CD reproduction  
starts.  
Cue (Fast forward):  
Keep depressed the rocker switch >>.  
Review (Fast backward):  
Keep depressed the rocker switch <<.  
Changing the audio source with  
SRC  
Ejecting the disc  
Press the  
/ SRC button for more  
Sampling tracks automatically  
with CD SCAN  
When you have inserted a CD, you can  
change between CD or radio reproduction.  
To switch over,  
than 1 second. The CD is ejected.  
To protect the CD mechanism, the automatic  
insertion and ejection of the disc must not be  
impaired in any way.  
This function allows you to sample all CD  
tracks one after another.  
press the  
/ SRC button.  
To activate the scan function,  
Selecting a track  
press the PS button for about  
2 seconds.  
The display shows “CD SCAN”.  
The following tracks will be scanned  
one after another.  
As soon as the disc is inserted, the activated  
CD functions will be shown in the display.  
Use the or rocker switch to select the  
desired title.  
To continue listening to the sampled track,  
Press rocker switch to skip titles.  
Press rocker switch to repeat titles.  
press the PS button once again.  
The set will then continue to play the  
track currently being sampled.  
If the rocker switch is only pressed once,  
thesystemwillgobacktothebeginningofthe  
currently played title and repeat it, provided  
that this track has at least been played for 5  
seconds.  
For more information, please also refer to  
chapter “DSC programming - SCANTIME”.  
26  
 
DSC programming  
This car radio offers direct software control  
(DSC) to adapt a number of default settings  
to your personal needs and to store them.  
In the following you will find an overview of all  
the default settings adjusted at the factory.  
To change a programmed parameter,  
BEEP  
Achnowledgement tone for  
all functions where the re-  
spective button has to be  
held down for more than 2  
seconds to activate the func-  
tion.  
LOUDNESS When listening at a low level,  
the loudness function will  
create a more natural sound  
by emphasizing the low fre-  
quency range.  
LOUD 1 - no boost/off  
Adjust volume between  
0 and 9 (0 = OFF).  
LOUD 6 - strong boost  
press DSC.  
Then use the rocker switch to select and  
change the functions described below.  
The display shows the the adjusted condi-  
tion.  
SCANTIME Use this function to specify  
the scan time (in the CD and  
BRIGHT  
The display brightness can  
be adjusted between 1 and  
15. You may set one day  
and one night adjustment.  
Brightness of night illumina-  
tion:  
Switch on the vehicle’s light-  
ing system and program the  
brightness value. For this,  
the illumination connector  
has to be hooked up to the  
electric system of the car.  
radio mode). Choose a value  
between 5 and 30 seconds.  
Select function  
S-DX 1  
S-LO 1  
SPEECH  
Use this function to adjust  
the seek tuning sensitivity for  
distant reception.  
DX. 1 - high sensitivity  
DX. 3 - low sensitivity  
Change-  
setting  
Change-  
setting  
Use this function to adjust  
the seek tuning sensitivity for  
local reception.  
LO. 1 - high sensitivity  
LO. 3 - low sensitivity  
Select function  
COLOUR  
CD DISP  
COLOUR green << >> red  
Use this function to display  
CD PLAY or TIME.  
Use this function for individu-  
al adjustment of the sound  
parameters, e.g. for speech  
programs.  
LED ON  
You can select between LED  
ON and LED OFF.  
SPEECH 0 - max. treble  
SPEECH 4 - min. treble  
27  
 
Appendix  
TA LEVEL Use this function to adjust  
the volume of traffic announ-  
cements between 1 and 9.  
The announcement will be  
played with the specified  
volume.  
Technical data  
Amplifier  
Output power:  
4 x 20 W RMS according  
to DIN 45324  
4 x 25 W music accord-  
ing to DIN 45324  
VOL FIX  
Use this function to adjust  
the initial volume when the  
set is switched on.  
FM  
Sensitivity:  
0.9 µV at 26 dB S/N ratio  
Frequency  
response:  
30 - 16,000 Hz (-3 dB)  
To quit the DSC mode and store the setting:  
Press DSC.  
CD  
Frequency  
response:  
20 - 20,000 Hz (-1 dB)  
Survey of DSC default settings  
BEEP  
4
BRIGHT  
COLOUR  
CD DISP  
LED  
LOUDNESS  
SCANTIME  
S-DX  
15  
RED  
TIME  
ON  
3
10s  
2
S-LO  
2
SPEECH  
TA LEVEL  
VOL FIX  
0
5
20  
Subject to modifications!  
28  
 
Blaupunkt-Werke GmbH  
Bosch Gruppe  
7/94  
K7/VKD 3 D94 162 004  
PM  
 

Belkin Network Router P75170EI User Manual
Bissell Vacuum Cleaner 3601 User Manual
BIXOLON Printer SRP F310 312 User Manual
Black Decker Kitchen Grill IG100 User Manual
Blodgett Hot Beverage Maker KLS DS User Manual
Bosch Appliances Network Router ATM POS Bridge User Manual
Boston Acoustics Automobile Accessories PRI665 User Manual
Bradford White Corp Water Heater D4403SFBN User Manual
Bushnell Binoculars 620726 User Manual
Canon All in One Printer PIXMA MG6620 User Manual