E
Digital Camera
EX-S20/EX-M20
User’s Guide
Thank you for purchasing this CASIO
Product.
• Before using it, be sure to read the
precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for
future reference.
• For the most up-to-date information about
this product, visit the official Exilim Website
EX-M20
K858PCM1DMX
INTRODUCTION
20 GETTING READY
Contents
About This Manual ..................................................... 20
General Guide ............................................................ 21
2
INTRODUCTION
Camera
21
22
USB Cradle
Unpacking .................................................................... 2
Features ....................................................................... 9
Precautions .................................................................11
Monitor Screen Contents ........................................... 23
REC mode
PLAY mode
Changing the Contents of the Monitor Screen
23
24
25
General Precautions
Data Error Precautions
Operating conditions
Condensation
Lens
11
13
13
14
14
15
Indicator Lamps.......................................................... 25
Attaching the Strap .................................................... 26
Power Requirements ................................................. 26
Other
To load the battery
To charge the battery
Power Supply Precautions
Turning the Camera On and Off
Auto Power Off (APO)
26
28
32
35
36
16 QUICK START GUIDE
First, charge the battery! ............................................ 16
To configure display language and clock settings ..... 17
To record an image .................................................... 18
To view a recorded image .......................................... 18
To delete an image..................................................... 19
Using the On-screen Menus ...................................... 37
Configuring Display Language and Clock Settings ... 39
To configure display language and clock settings
40
3
INTRODUCTION
Using the Movie Mode ............................................... 66
Recording Audio (EX-M20 Only) ............................... 67
43 BASIC IMAGE RECORDING
Recording an Image ................................................... 43
Adding Audio to a Snapshot
Recording Your Voice
67
69
Aiming the Camera
Recording an lmage
About the REC Mode Monitor Screen
Recording Precautions
43
44
45
45
Using the Histogram .................................................. 70
REC Mode Camera Settings ..................................... 72
Specifying ISO Sensitivity
72
73
73
74
75
76
77
Using Zoom ................................................................ 46
Using the Flash .......................................................... 47
Turning the On-screen Grid On and Off
Turning Image Review On and Off
Assigning Functions to the [̇] and [̈] Keys
Assigning Functions to the [̆] and [̄] Keys
Specifying Power On Default Settings
Resetting the Camera
Flash Precautions
49
Recording Macro Images ........................................... 50
Using the Self-timer ................................................... 51
Specifying Image Size and Quality ............................ 52
To specify the image size
To specify image quality
52
53
78 PLAYBACK
Basic Playback Operation.......................................... 78
55 OTHER RECORDING FUNCTIONS
Playing an Audio Snapshot (EX-M20 Only)
79
Flipping the Display.................................................... 80
Zooming the Display Image ....................................... 81
Resizing an Image ..................................................... 82
Cropping an Image..................................................... 83
Playing a Movie .......................................................... 84
Displaying the Calendar Screen ................................ 86
Exposure Compensation (EV Shift) ........................... 55
Adjusting White Balance ............................................ 56
Adjusting White Balance Manually
57
Using the BESTSHOT Mode ..................................... 58
Creating Your Own BESTSHOT Setup
60
Combining Shots of Two People into a Single Image
(Coupling Shot) .......................................................... 62
Recording a Subject onto an Existing Background
Image (Pre-shot) ........................................................ 64
4
INTRODUCTION
Playing a Slide Show ................................................. 87
PRINT Image Matching II ............................................. 104
Exif Print ................................................................... 104
Using USB DIRECT-PRINT ..................................... 105
Using the FAVORITE Folder .................................... 107
To specify the slideshow images
To specify the slideshow time
To set the slideshow interval
Using the Photo Stand Feature
88
89
90
90
Rotating the Display Image........................................ 91
Using Image Roulette ................................................ 92
Adding Audio to a Snapshot (EX-M20 Only) ............. 93
To copy a file to the FAVORITE folder
To display a file in the FAVORITE folder
To delete a file from the FAVORITE folder
To delete all files from the FAVORITE folder
107
108
109
110
To re-record audio
94
Playing Back a Voice Recording File
(EX-M20 Only) ........................................................... 95
111 OTHER SETTINGS
Turning the Key Tone On and Off (EX-S20) ............. 111
Configuring Sound Settings (EX-M20) ..................... 111
97 DELETING FILES
To configure sound settings
To set the volume level
111
112
Deleting a Single File ................................................. 97
Deleting All Files ........................................................ 98
Specifying an Image for the Startup Screen ............113
Configuring Power Down Image Settings.................114
Specifying the File Name Serial Number
Generation Method ...................................................116
99 FILE MANAGEMENT
Folders ....................................................................... 99
Using the Alarm .........................................................117
Memory Folders and Files
99
To set an alarm
117
118
Stopping the Alarm
Protecting Files ........................................................ 100
To protect a single file
To protect all files in memory
100
101
Setting the Clock .......................................................118
To select your Home Time zone
To set the current time and date
Changing the Date Format
118
119
120
DPOF........................................................................ 101
To configure print settings for a single image
To configure print settings for all images
102
103
5
INTRODUCTION
Using World Time ..................................................... 120
Memory Data ............................................................ 142
To display the World Time screen
To configure World Time settings
To configure summer time (DST) settings
120
121
122
DCF Protocol
142
142
144
144
Memory Directory Structure
Image Files Supported by the Camera
Built-in Memory and Memory Card Precautions
Changing the Display Language ............................. 123
Formatting Built-in Memory...................................... 123
145 USING THE CAMERA WITH A COMPUTER
125 USING A MEMORY CARD
Using the Album Feature ......................................... 145
Creating an album
145
146
147
149
152
Using a Memory Card .............................................. 126
Selecting an Album Layout
Configuring Detailed Album Settings
Viewing Album Files
To insert a memory card into the camera
To remove a memory card from the camera
Formatting a Memory Card
126
126
127
128
Saving an Album
Memory Card Precautions
Installing the Software from the CD-ROM ............... 152
Copying Files ........................................................... 129
To copy all the files in built-in memory
About the bundled CD-ROM
Computer System Requirements
152
153
to a memory card
To copy a file from a memory card to built-in memory 130
129
Installing Software from the CD-ROM in Windows ... 154
Getting Started
154
154
155
155
156
156
156
Selecting a Language
Viewing the Contents of the “Read me” File
Installing an Application
Viewing User Documentation (PDF Files)
User Registration
Exiting the Menu Application
131 VIEWING IMAGES ON A COMPUTER
Using the Camera with a Windows Computer ........ 131
USB Connection Precautions
136
Using the Camera with a Macintosh Computer....... 136
Installing Software from the CD-ROM on a
Macintosh ................................................................. 157
USB Connection Precautions
140
Operations You Can Perform from Your Computer... 140
Installing Software
Viewing User Documentation (PDF Files)
157
158
Using a Memory Card to Transfer Images
to a Computer .......................................................... 141
6
INTRODUCTION
159 PLAYING AN AUDIO FILE (EX-M20 Only)
173 APPENDIX
Transferring Audio Files to the Camera ................... 159
Preparing the Camera for Audio Player Operation ... 160
Using the Camera as an Audio Player .................... 161
Menu Reference....................................................... 173
Indicator Lamp Reference ....................................... 175
Camera Indicator Lamps
175
177
USB Cradle Indicator Lamps
General Guide
161
163
Troubleshooting Guide ............................................. 178
Basic Remote Controller Operations
Display Messages
181
Playing Back Audio Files ......................................... 164
Specifications ........................................................... 182
Specifying the Audio Playback Mode
Playing Back Tracks Randomly
Selecting a Specific Track for Playback
Specifying the Track Playback Sequence
Using BASS BOOST
164
164
165
166
168
Main Specifications
182
Deleting MP3 Files from File Memory ..................... 169
Deleting a Single MP3 File
Deleting All MP3 Files
170
171
Disabling Remote Controller Button Operations ..... 171
LCD Remote Control Error Messages ..................... 172
Audio Playback Precautions .................................... 172
7
INTRODUCTION
IMPORTANT!
• The USB driver (mass storage) uses Phoenix
Technologies Ltd. software.
• The contents of this manual are subject to change
without notice.
• CASIO COMPUTER CO., LTD. assumes no
responsibility for any damage or loss resulting from
the use of this manual.
• CASIO COMPUTER CO., LTD. assumes no
responsibility for any loss or claims by third parties
which may arise through the use of the EX-S20/EX-
M20.
• CASIO COMPUTER CO., LTD. shall not be held
liable for any damages or losses suffered by you or
any third party due to the use of Photo Loader and/or
Photohands.
Compatibility Software Copyright C 1997
Phoenix Technologies Ltd., All Rights Reserved.
• MPEG Layer-3 audio decoding technology licensed
from Fraunhofer IIS and Thomson Multimedia.
• Other company, product and service names used
herein may also be trademarks or service marks of
others.
• Photo Loader and Photohands are the property of
CASIO COMPUTER CO., LTD. Except as stipulated
above, all copyrights and other related rights to these
applications revert to CASIO COMPUTER CO., LTD.
• CASIO COMPUTER CO., LTD. assumes no
responsibility for any damage or loss caused by
deletion of data as a result of malfunction, repairs, or
battery replacement. Be sure to back up all important
data on other media to protect against its loss.
• The SD logo is a registered trademark.
• Windows, Internet Explorer, and DirectX are
registered trademarks of Microsoft Corporation.
• Macintosh is a registered trademark of Apple
Computer, Inc.
I Copyright Restrictions
Except for the purposes of your own personal enjoyment,
unauthorized copying of snapshot files, movie files, audio
files, and music files violates copyright laws and
international contracts. Distribution to third parties of such
files over the Internet without permission of the copyright
holder, whether for profit or for free, violates copyright laws
and international contracts.
•
MultiMediaCard is a trademark of Infineon
Technologies AG of Germany, and licensed to the
MultiMediaCard Association (MMCA).
• Acrobat and Acrobat Reader are trademarks of
Adobe Systems Incorporated.
8
INTRODUCTION
• Easy Image Transfer
Transfer images to a computer simply by placing the
camera onto the USB cradle.
Features
• 2.0 million Effective Pixels
A high-resolution megapixel CCD provides 2.0 million
effective pixels (2.11 million total pixels) for images that
print beautifully.
• Photo Stand feature
A slideshow of images in file memory can be played while
the camera is on its USB cradle.
• Fixed focus lens for quick operation
Fixed focus eliminates the need for lens movement, which
shortens startup time and shooting time.
• BESTSHOT
Simply select the sample scene that matches the type of
image you are trying to record and the camera performs
troublesome setups automatically for beautiful pictures
every time.
• Macro Function
Text images come out clear and easy-to read.
• Compact electric lens barrier
• Coupling Shot and Pre-shot
Protects the lens against damage.
Coupling Shot lets you combine two subjects into a single
image, while Pre-shot lets you add a subject to a
previously recorded background image. This means you
can create images that include you and your friend, even
if you are the only two people around. You can use
Coupling Shot and Pre-shot by selecting the applicable
sample images in the BESTSHOT mode.
• 1.6-inch TFT color LCD monitor screen
• 4X digital zoom
• 10MB Flash memory
Images can be recorded without using a memory card.
• Support for SD memory cards and MMC (MultiMedia
Cards) for memory expansion
• Image Roulette Feature
Images cycle like a slot machine on the display until one
of them remains.
• Easy Charging
Just place the camera onto the USB cradle to charge its
battery.
• Triple Self-timer mode
The self-timer can be set up to repeat three times,
automatically.
9
INTRODUCTION
• Real-time histogram
• DCF Data Storage
An on-screen histogram lets you adjust exposure as you
view the effect on overall image brightness, which makes
shooting under difficult lighting conditions easier than
ever before.
DCF (Design rule for Camera File system) data storage
protocol provides image inter-compatibility between the
digital camera and printers.
• Digital Print Order Format (DPOF)
• World Time
Images can be printed easily in the sequence you want
using a DPOF compatible printer. DPOF can also be used
when specifying images and quantities for printing by
professional print services.
A simple operation sets the current time for your current
location. You can select from among 162 cities in 32 time
zones.
• Alarm
• PRINT Image Matching II Compatible
A built-in alarm helps to keep you on time for important
events, and even can be used in place of an alarm clock.
You can also have a specific image appear on the
monitor screen when the alarm time is reached.
Images include PRINT Image Matching II data (mode
setting and other camera setup information). A printer that
supports PRINT Image Matching II reads this data and
adjusts the printed image accordingly, so your images
come out just the way you intended when you recorded
them.
• Album Function
HTML files are generated automatically to create an
album of recorded images. Album contents can be viewed
and printed using a standard Web browser. Images can
also be incorporated into Web pages quickly and easily.
• USB DIRECT-PRINT support
Your camera supports USB DIRECT-PRINT, which was
developed by Seiko Epson Corporation. When connected
directly to a printer that supports USB DIRECT-PRINT,
you can select images to print and start the print
operation directly from the camera.
• Calendar screen
A simple operation displays a full-month calendar on the
camera’s monitor screen. Each day of the full-month
calendar shows a thumbnail of the first image recorded
for that date, which helps to make searching for a
particular image quicker and easier.
• Bundled with Photo Loader and Photohands
Your camera comes bundled with Photo Loader, the
popular application that automatically loads images from
your camera to your PC. Also included is Photohands, an
application that makes image retouching quick and easy.
10
INTRODUCTION
* EX-M20 Only
Precautions
• Snapshot + Audio Mode
Adds audio to a snapshot.
General Precautions
Be sure to observe the following important precautions
whenever using the EX-S20/EX-M20.
• Movie + Audio Mode
• Voice Recording
Quick and easy recording of voice input.
All references in this manual to “this camera” and “the
camera” refer to the CASIO EX-S20/EX-M20 Digital
Camera.
• After Recording
Adds audio to images after they are recorded.
• Never try to take pictures or use the built-in display while
operating a motor vehicle or while walking. Doing so
creates the danger of serious accident.
• Never try to open the case of the camera or attempt your
own repairs. High-voltage internal components create the
risk of electric shock when exposed. Always leave
maintenance and repair work up to a CASIO authorized
service center.
• Never look at the sun or any other bright light through the
camera’s viewfinder. Doing so can damage your eyesight.
• Keep the small parts and accessories of this camera out
of the reach of small children. If swallowed accidentally,
contact your physician immediately.
• Audio Player Capabilities
Use the camera to play back music data from standard
MP3 (MPEG-1 Audio Layer-3/MPEG-2 Audio Layer-3)
files.
• Selectable Sound Settings
You can configure different sounds to play whenever you
turn on the camera, press the shutter release button, or
perform a key operation.
• Never fire the flash in the direction of a person operating
a motor vehicle. Doing so can interfere with the driver’s
vision and create the danger of accident.
11
INTRODUCTION
• Never fire the flash while it is too close to the subject’s
eyes. Intense light from the flash can cause eye damage
if it is fired too close to the eyes. This is especially true
with young children. When using the flash, the camera
should be at least one meter (3.3´) from the eyes of the
subject.
• Keep the camera away from water and other liquids, and
never let it get wet. Moisture creates the danger of fire
and electric shock. Never use the camera outdoors in the
rain or snow, at the seashore or beach, in the bathroom,
etc.
• Should foreign matter or water ever get into the camera,
immediately turn it off. Next, remove the camera’s battery
and/or unplug the AC adaptor power cord from the power
outlet, and contact your dealer or nearest CASIO
authorized service center. Using the camera under these
conditions creates the danger of fire and electric shock.
• Should you ever notice smoke or a strange odor coming
out of the camera, immediately turn it off. Next, taking
care you do not burn your fingers, remove the camera’s
battery and/or unplug the AC adaptor power cord from the
power outlet, and contact your dealer or nearest CASIO
authorized service center. Using the camera under these
conditions creates the danger of fire and electric shock.
After making sure there is no more smoke coming from
the camera, take it to your nearest CASIO authorized
service center for repair. Never attempt your own
maintenance.
• Never use the AC adaptor to power any other device
besides this camera. Never use any other AC adaptor
besides the one that comes with this camera.
• Never cover the AC adaptor with a quilt, blanket, or other
cover while it is in use, and do not use it near a heater.
• At least once a year, unplug the AC adaptor power cord
from the power outlet and clean the area around the
prongs of the plug. Dust build up around the prongs can
create the danger of fire.
• If the camera’s case should ever become cracked due to
dropping it or otherwise subjecting it to rough treatment,
immediately turn it off. Next, remove the camera’s battery
and/or unplug the AC adaptor power cord from the power
outlet, and contact your dealer or nearest CASIO
authorized service center.
• Never use the camera inside of an aircraft or in any other
areas where its use is prohibited. Doing so can result in
an accident.
• Physical damage and malfunction of this camera can
cause the data stored in its memory to be deleted. Be
sure to always keep backup copies of data by transferring
them to personal computer memory.
• Never open the battery cover, disconnect the AC adaptor
from the camera, or unplug the AC adaptor from the wall
socket while recording images. Doing so will not only
make storage of the current image impossible, it can also
corrupt other image data already stored in file memory.
12
INTRODUCTION
Data Error Precautions
Operating conditions
• Your digital camera is manufactured using precision
digital components. Any of the following creates the risk
of corruption of data in file memory.
• This camera is designed for use in temperatures ranging
from 0°C to 40°C (32°F to 104°F).
• Do not use or keep the camera in the following areas.
— In areas subject to direct sunlight
— Removing the battery or memory card, or setting the
camera onto the USB cradle while the camera is
performing a record or memory access operation
— Removing the battery, removing the memory card, or
placing the camera onto the USB cradle while the
operation/flash charge lamp is still flashing after you
turn off the camera
— In areas subject to high humidity or dust
— Near air conditioners, heaters, or other areas subject
to temperature extremes
— Inside of a closed vehicle, especially one parked in the
sun
— In areas subject to strong vibration
— Disconnecting the USB cable, removing the camera
from the USB cradle, or disconnecting the AC adaptor
from the USB cradle while a data communication
operation is being performed
— Using low battery
— Other abnormal operations
Any of the above conditions can cause an error message to
appear on the monitor screen (page 181). Follow the
instructions provided by the message to eliminate the
cause of the error.
13
INTRODUCTION
Condensation
Lens
• When you bring the camera indoors on a cold day or
otherwise expose it to a sudden change of temperature,
there is the possibility that condensation can form on the
exterior or on interior components. Condensation can
cause malfunction of the camera, so you should avoid
exposing it to conditions that might cause condensation.
• To keep condensation from forming, place the camera
into a plastic bag before moving it into a location that is
much warmer or colder than your current location. Leave
it in the plastic bag until the air inside the bag has a
chance to reach the same temperature as the new
location. If condensation does form, remove the battery
from the camera and leave the battery cover open for a
few hours.
• Never apply too much force when cleaning the surface of
the lens. Doing so can scratch the lens surface and cause
malfunction.
• Fingerprints, dust, or any other soiling of the lens can
interfere with proper image recording. Never touch the
lens with your fingers. You can remove dust particles
from the lens surface by using a lens blower to blow them
off. Next, wipe the surface of the lens with a soft lens
cloth.
14
INTRODUCTION
Other
• Take care never to sit down with the camera in the pocket
of your slacks or otherwise subject the camera to severe
stress. Doing so can crack the LCD monitor screen.
• The camera may become slightly warm during use. This
does not indicate malfunction.
• If the exterior of the camera needs cleaning, wipe it with a
soft, dry cloth.
15
QUICK START GUIDE
First, charge the battery!
1. Load the battery (page 26).
2. Place the camera onto the USB cradle to charge the
battery (page 28).
1
2
3
• It takes about two hours to achieve a full charge.
1
2
M
E
N
U
D
IS
P
16
QUICK START GUIDE
To configure display language and clock settings
IMPORTANT!
• Be sure to configure the following settings
before using the camera to record images
(See page 40 for details).
1. Press the power button to turn on the camera.
2. Press [̆], [̄], [̇], and [̈] to select the language you
want.
3. Press [SET] to register the language setting.
1
4. Use [̆], [̄], [̇], and [̈] to select the geographical
area you want, and then press [SET].
MENU
DISP
5. Use [̆] and [̄] to select the city you want, and then
press [SET].
6. Use [̆] and [̄] to select the summer time (DST)
setting you want, and then press [SET].
2, 3, 4, 5, 6, 7, 8, 9
7. Use [̆] and [̄] to select the date format setting you
want, and then press [SET].
8. Set the date and the time.
9. Press [SET] to register the clock settings and exit the
setting screen.
17
QUICK START GUIDE
To record an image
To view a recorded image
(See page 44 for details.)
(See page 78 for details.)
4
1
1
M
MENU
DISP
E
N
U
3
D
IS
P
2
3
1. Press the power button to turn on the
camera.
1. Press the power button to turn on the
camera.
2. Align the mode selector with “ ” (REC).
2. Align the mode selector with “ ” (PLAY).
3. Point the camera at the subject, use the
monitor screen or viewfinder to compose the
image.
3. Use [̇] and [̈] to scroll through the images
on the monitor screen.
4. Holding the camera still, gently press the
shutter release button.
18
QUICK START GUIDE
To delete an image
(See page 97 for details.)
1
M
E
N
U
D
IS
P
3, 4, 5, 6
1. Press the power button to turn on the camera.
2. Align the mode selector with “ ” (PLAY).
3. Press [̄] ( ).
4. Use [̇] and [̈] to display the image you want to delete.
5. Use [̆] and [̄] to select “Delete”.
• To exit the image delete operation without deleting anything, select
“Cancel”.
6. Press [SET] to delete the image.
19
GETTING READY
This section contains information about things you need to
know about and do before trying to use the camera.
I Button Operations
Button operations are indicated by the button name inside
of brackets ([ ]).
About This Manual
I On-screen Text
On-screen text is always enclosed by double quotation
marks (“ ”).
This section contains information about the conventions
used in this manual.
I Terminology
The following table defines the terminology used in this
manual.
I File Memory
The term “file memory” in this manual is a general term that
refers to the location where your camera is currently storing
the images you record. File memory can be any one of the
following three locations.
This term as used in this
Means this:
manual:
“this camera” or “the
camera”
The CASIO EX-S20/EX-M20
Digital Camera
• The camera’s built-in Flash memory
• An SD memory card loaded in the camera
• A MultiMediaCard loaded in the camera
“file memory”
The location where the
camera is currently storing
images you record (page 44)
For more information about how the camera stores images,
see page 99.
“battery”
The NP-20 Rechargeable
Lithium Ion Battery
“optional charger unit”
The optionally available
CASIO BC-10L Charger Unit
20
GETTING READY
General Guide
The following illustrations show the names of each component, button, and switch on the camera.
• All the illustrations in this manual show the EX-M20. See the text that accompanies the illustrations for information about how
the EX-S20 and EX-M20 differ from each other.
Camera
I Front
I Back
1
2
7
8
9
3
0
4
A
B
1 Power button
2 Shutter release button
3 Flash
7 Viewfinder
8 Operation/Flash charge
lamp
9 Normal ( ) / Macro (
selector
0 Mode selector
A Strap bar
B Battery cover
C [̆][̄][̇][̈]
D [SET] button
E [DISP] button
F [MENU] button
G Monitor Screen
M
E
N
U
4 Lens
)
D
IS
P
5 Self-timer lamp
6 Microphone
(EX-M20 only)
G
F
E
D
6
C
5
21
GETTING READY
I Bottom
I Front
H
I
J
1
2
3
1 Camera connector
2 [PHOTO] button
3 [USB] button
4 [USB] lamp
5 [CHARGE] lamp
H Speaker (EX-M20 only)
I Connector
J Memory card slot
5
4
I Back
USB Cradle
Simply placing your CASIO digital camera onto the USB
cradle lets you perform the following tasks.
6 [DC IN 5.3V]
(AC adaptor connector)
7 [USB]
• Battery charging (page 28)
• Automatic transfer of images to a computer (page 131)
• Viewing of images using the Photo Stand slideshow
feature (page 90).
(USB port)
6
7
NOTE
• See “Using the Camera as an Audio Player” on page
161 for information about the LCD remote controller
that comes with the EX-M20.
22
GETTING READY
Monitor Screen Contents
The monitor screen uses various indicators and icons to keep you informed of the camera’s status.
REC mode
1 Flash Mode indicator
4 Self-timer
8 Image size
1600 ҂ 1200 pixels
1600҂ 1072 pixels
1280 ҂ 960 pixels
640 ҂ 480 pixels
Movie Recording: recording
time (seconds)
1234 5 6
7
None Auto
None 1-Image
Flash Off
Self-timer 10 sec
Self-timer 2 sec
Triple self-timer
10
s
8
9
0
Flash On
2s
Red-eye reduction
x3
2 Focus Mode indicator
E
9 Quality
FINE
5 REC modes
None Normal
Snapshot
A
B
NORMAL
ECONOMY
Macro
BESTSHOT
Movie
3 White balance indicator
0
Built-in memory selected
for data storage.
None Auto
Snapshot Audio
(EX-M20 only)
Memory card selected
for data storage.
Sunlight
Shade
C
D
Voice Recording
(EX-M20 only)
A ISO sensitivity
B Date and time
C EV value
Light Bulb
Fluorescent
Manual
6 Digital zoom indicator
7 Memory capacity
(Remaining number of storable
images)
D Battery capacity
E Digital zoom factor
23
GETTING READY
PLAY mode
12
3
4
5
6
1 PLAY mode file type
5 Quality
FINE
Snapshot
NORMAL
ECONOMY
Movie
Snapshot Audio
(EX-M20 only)
6
Built-in memory selected for data
storage.
Voice Recording
(EX-M20 only)
Memory card selected for data storage.
7
7 Date and time
2 Image protection indicator
3 Folder number/File number
8 Battery capacity
8
4 Image size
1600 ҂ 1200 pixels
1600 ҂ 1072 pixels
1280 ҂ 960 pixels
640 ҂ 480 pixels
IMPORTANT!
• Some information may not
display properly if you display an
image that was recorded using a
different digital camera model.
24
GETTING READY
Changing the Contents of the Monitor
Screen
Each press of the [DISP] button changes the contents of
the monitor screen as shown below.
Indicator Lamps
You can find out the operational status of the camera and
the USB cradle at a glance by checking the color of the
indicator lamps, and whether a lamp is lit or flashing. For
details, see “Indicator Lamp Reference” on page 175.
Indicators
on
(page 23)
Histogram
on
(page 70)
Indicators
off
Monitor
screen off
Operation/Flash charge lamp
IMPORTANT!
• You cannot turn off the monitor screen in the
following cases:
In the PLAY mode, in the BESTSHOT mode, when
not recording in the Movie mode
• You cannot use the [DISP] button to change the
contents of the monitor screen while a movie is being
recorded, or while standing by for or performing
audio recording.
M
E
N
U
D
IS
P
Self-timer lamp
[USB] lamp
• In the Voice Recording mode, you can only turn
indicators on and off.
[CHARGE] lamp
25
GETTING READY
Attaching the Strap
Power Requirements
Attach the strap to the strap bar as shown in the illustration.
Your camera is powered by a rechargeable lithium ion
battery (NP-20).
To load the battery
M
E
N
U
1. Pressing the battery cover on the side of the
camera, slide it in the direction indicated by
the ̆ mark and then swing it open.
D
I
S
P
M
E
N
U
D
IS
P
IMPORTANT!
• Be sure to keep the strap around your wrist when
using the camera to protect against accidentally
dropping it.
• The supplied strap is intended for use with this
camera only. Do not use it for any other purpose.
• Never swing the camera around by the strap.
26
GETTING READY
IMPORTANT!
2. Align the arrow mark on the battery with the
arrow mark on the camera as shown in the
illustration, and slide the battery into the
battery compartment.
• Use only the special NP-20 rechargeable lithium ion
battery to power this camera. Use of any other type
of battery is not supported.
Arrow marks
NOTE
• To remove the battery, open the battery cover.
Taking care that the battery does not suddenly fall
out of the camera, tilt the camera towards the side.
When the battery slides out part way, pull it out by
hand.
NP-20
The battery is not charged when you purchase the
camera. You need to charge the battery before using
the camera for the first time.
3. Swing the battery cover closed, and then slide
it in the direction indicated by the arrow while
pressing down on it.
27
GETTING READY
4. Turn off the camera.
To charge the battery
5. Set the camera onto
the USB cradle.
1. Connect the AC power cord to the bundled
AC adaptor.
• Do not place the
camera onto the USB
cradle while it is turned
on.
M
E
N
U
2. Plug the other end of the AC power cord into
a household power outlet.
D
IS
P
• The [CHARGE] lamp on
the USB cradle should
turn red, indicating that
charging has started.
When charging is
complete, the
[CHARGE] lamp will
turn green.
3. Connect the AC adaptor to the [DC IN 5.3V]
connector of the USB cradle.
USB Cradle
[DC IN 5.3V]
[CHARGE] lamp
AC Adaptor
6. After charging is complete, remove the
camera from the USB cradle.
• While holding the USB cradle in one hand, use your
other hand to lift the left side from the USB cradle
first (as if you were rotating it clockwise vertically).
This ensures that you properly disengage the
connector on the bottom of the camera from the USB
cradle’s connector.
AC power cord
28
GETTING READY
IMPORTANT!
• If the [CHARGE] lamp starts flashing red, it means
that an error occurs while charging. An error can be
caused by any of the following: a problem with the
USB cradle, a problem with the camera, or a problem
with the battery or how it is loaded. Remove the
camera from the USB cradle and see if it works
normally.
• You can use the USB cradle to charge the camera’s
battery, to exchange data with a computer over a
USB connection, or when using the Photo Stand
feature only.
• It takes about two hours to achieve a full charge.
Actual charging time depends on current battery
capacity and charging conditions.
• Use only the USB cradle (CA-23) or the optionally
available charger unit (BC-10L) to charge the special
NP-20 rechargeable lithium ion battery. Never use
any other charging device.
• Use only the bundled AC adaptor. Never use any
other type of AC adaptor. Do not use optionally
available AD-C40, AD-C620 and AD-C630 AC
adaptors with this camera.
• Make sure that the camera connector of the USB
cradle is securely inserted into the camera’s
connector as far as it will go.
• The [CHARGE] lamp may remain amber colored and
the charge operation may not start right away if you
try to charge immediately after using the camera
(which causes battery to become warm) or when it is
too hot or too cold where you are performing the
charge operation. If this happens, simply wait until
the battery reaches normal temperature. The
[CHARGE] lamp will turn red and charging will start
when the battery temperature returns to the
allowable charging temperature range.
NOTE
• The bundled AC adaptor is designed for operation
with any power supply in the range of 100V to 240V
AC. Note, however, that the shape of the AC power
cord plug varies according to country or geographic
area. If you plan to use the AC adaptor in a
geographic area where the power receptacle shape
is different from that in your area, replace the AC
power cord with one of the other ones that comes
with the camera, or purchase a commercially
available AC power cord that is compatible with the
power outlets in that area.
29
GETTING READY
I If the camera works normally
I Battery Life Guidelines
The battery life guideline values given below indicate the
amount of time under the conditions defined below the
table, until power automatically turns off due to battery
failure. They do not guarantee that the battery will provide
the amount of service indicated. Low temperatures and
continued use reduce battery life.
1. Continue using the camera until the current
charge is used up, and then charge the
battery.
I If the camera does not work normally
Operation
Approximate Battery Life
720 shots (120 minutes)
This can mean there is a problem with how the battery is
loaded.
Number of Shots, Continuous
Recording*1 (Recording Time)
Number of Shots, Normal
1. Remove the battery from the camera and
check the battery contacts for dirt. If the
contacts are dirty, wipe them clean with a dry
cloth.
190 shots (95 minutes)
180 minutes
Recording*2 (Recording Time)
Continuous Playback*3
(Continuous Snapshot Recording)
Continuous Voice Recording*4
Continuous Audio Playback*5
170 minutes
450 minutes
2. Check to make sure that the AC adaptor’s
power cord is connected securely to the
power outlet and USB cradle.
Supported Battery: NP-20 (Rated Capacitance: 680mAh)
*1 Continuous Recording Conditions
• Temperature: 23°C (73°F)
• Monitor screen: On
• If the same symptoms occur again when you place
the camera on the USB cradle after taking the above
steps, contact a CASIO authorized service center.
• Flash: Off
• Image recorded about every 10 seconds
30
GETTING READY
*2 Normal Recording Conditions
• Temperature: 23°C (73°F)
I Tip to Make the Battery Last Longer
• If you do not need the flash while recording, select
(flash off) for the flash mode. See page 47 for more
information.
• You can also conserve battery power by using the [DISP]
button to turn off the monitor screen.
• Monitor screen: On
• Flash: On (one flash every two shots)
• Image recorded about every 30 seconds
• Power off/on every 10 shots
*3 Continuous Playback Conditions
• Temperature: 23°C (73°F)
I Low Battery Indicator
• Scroll one image about every 10 seconds
The following shows how the battery capacity indicator on
the monitor screen changes as battery power is used. The
indicator means that remaining battery power is low.
Note that you will not be able to record images while the
*4 Voice recording times are based on continuous
recording.
*5 Audio playback times are based on continuous output
battery indicator is
. Charge the battery immediately
(through headphones).
whenever either of these indicators appears.
• Voice recording and audio playback times apply to the
EX-M20 only.
• The above values are based on a new battery starting
from a full charge. Repeated charging shortens battery
life.
Battery Level
Indicator
High
Low
• Battery life is greatly affected by how much you use flash,
zoom and other functions, and how long you leave power
turned on.
31
GETTING READY
• Failure to observe any of the following precautions
while using the battery creates the risk of over-heating,
fire, and explosion.
— Never use any other type of charger except the
optional charger unit specified for the battery.
— Never try to use the battery to power any other
device other than this camera.
— Never use or leave the battery near open flame.
— Never place the battery in a microwave oven, throw
it into fire, or otherwise expose it to intense heat.
— Make sure the battery is oriented correctly when you
load it into the camera or attach it to the optional
charger unit.
Power Supply Precautions
Note the following precautions when handling or using the
battery and the optional charger unit.
I Battery Handling Precautions
G SAFETY PRECAUTIONS
Be sure to read the following Safety Precautions before
trying to use the battery for the first time. Keep these safety
precautions and all operating instructions on hand for
future reference.
NOTES
— Never carry or store the battery together with items
that can conduct electricity (necklaces, pencil lead,
etc.)
— Never try to take the battery apart, modify it in any
way, or expose it to strong impact.
• The term “battery” in this manual refers to the CASIO
NP-20 Rechargeable Lithium Ion Battery.
• The term “optional charger unit” in the following
precautions refers to the optionally available CASIO
BC-10L Charger Unit.
— Do not immerse the battery in fresh water or salt
water.
— Do not use or leave the battery under direct
sunlight, in an automobile parked in the sun, or in
any other area subject to high temperatures.
32
GETTING READY
• Should you ever notice leakage, strange odor, heat
generation, discoloration, deformation, or any other
abnormal condition while using, charging, or storing a
battery, immediately remove it from the camera or
optional charger unit and keep it away from open flame.
• If the battery does not achieve full charge after the
normal charging time has passed, stop charging.
Continued charging creates the risk of overheating, fire,
and explosion.
• Battery fluid can damage your eyes. Should battery
fluid get into your eyes accidentally, immediately rinse
them with clean tap water and then consult a physician.
• Be sure to read page 28 of this User’s Guide and the
instructions that come with the optional charger unit
before using or charging the battery.
• If the battery is to be used by young children, make
sure that a responsible adult makes them aware of the
precautions and proper handling instructions and make
sure that they handle the battery correctly.
• Should fluid from the battery accidentally get onto
clothing or your skin, immediately rinse it off with clean
tap water. Prolonged contact with battery fluid can
cause skin irritation.
G PRECAUTIONS DURING USE
• The battery is designed for use with this CASIO digital
camera only.
• Use only the USB cradle that comes with the camera or
the specified optional charger unit to charge the
battery. Never use any other type of charger unit for
charging.
• A new battery is not charged. Be sure to charge the
battery before using it for the first time.
• Use of a battery in cold environments shortens the
operating time you can expect on a full charge. Charge
the battery in a location where the temperature is in the
range of 10°C to 35°C (50°F to 95°F). Charging
outside this temperature range can cause charging to
take longer than normal or even cause charging to fail.
• Very limited operation following a full charge indicates
that the battery has reached the end of its service life.
Replace the battery with a new one.
• Never wipe the battery with thinner, benzene, alcohol,
or other volatile agents or chemically treated rags.
Doing so can cause deformation of the battery and lead
to malfunction.
33
GETTING READY
G BATTERY STORAGE PRECAUTIONS
I USB Cradle and AC Adaptor Precautions
• Make sure you remove the battery when you do not
plan to use the camera for a long time. A battery left in
the camera discharges very small amounts of power
even when power is turned off, which can lead to a
dead battery or the need for longer charging before the
next use.
• Never use an electrical outlet whose voltage
is outside the rating marked on the AC
adaptor. Doing so can create the danger of
fire or electric shock. Use only the bundled
AC adaptor specified for this camera.
• Do not allow the AC adaptor cord to become
cut or damaged, do not place heavy objects
on it, and keep it away from heat. A damaged
power cord creates the risk of fire and electric
shock.
• Store the battery in a cool, dry place (20°C (68°F) or
lower).
G USING THE BATTERY
• Never try to modify the AC adaptor cord, or
subject it to severe bending, twisting, or
pulling. Doing so creates the risk of fire and
• See page 28 of this manual or the instructions that
come with the optional charger unit for information
about charging procedures and charging times.
• When transporting a battery, keep it either loaded in
the camera or stored in its case.
Caution!
electric shock.
• Never touch the AC adaptor while your hands
are wet. Doing so creates the risk of electric
shock.
• Do not overload extension cords or wall
outlets. Doing so creates the danger of fire
and electric shock.
• Should the cord of the AC adaptor become
damaged (exposed internal wiring), request a
replacement from a CASIO authorized service
center. A damaged AC adaptor cord creates
the danger of fire or electric shock.
34
GETTING READY
• Use the AC adaptor where it will not be
Turning the Camera On and Off
Press the power button to turn the
camera on and off.
Pressing the power button to turn
on the camera causes the
operation/flash charge lamp to turn
green. Press the power button
again to turn off the camera.
splashed with water. Water creates the risk of
fire and electric shock.
• Do not place a vase or any other container
filled with liquid on top of the AC adaptor.
Water creates the risk of fire and electric
shock.
ON/OFF
Caution!
Power button
• Make sure you always remove the camera from the USB
cradle before connecting or disconnecting the AC
adaptor.
• Charging, USB data communication, and using the Photo
Stand feature can cause the AC adaptor to become
warm. This is normal and does not indicate malfunction.
• Unplug the AC power cord from the power outlet
whenever you are not using it.
IMPORTANT!
• If camera power is turned off by the Auto Power Off
feature, press the power button to turn it back on
again.
• Never place a blanket or any other cover on the AC
adaptor. Doing so creates the risk of fire.
35
GETTING READY
5. Use [̆] and [̄] to change the currently
Auto Power Off (APO)
Auto Power Off (APO) automatically turns off the camera
when you do not perform any operation for a certain
amount of time.
selected setting, and then press [SET].
To do this:
Select this setting:
Set the Auto Power Off trigger time to
2 minutes
2 min
5 min
1. Turn on the camera, and then align the mode
Set the Auto Power Off trigger time to
5 minutes
selector with “ ” (REC) or “ ” (PLAY).
2. Press [MENU].
IMPORTANT!
• Auto Power Off is automatically disabled under any
one of the following conditions.
3. Use [̇] and [̈] to select the “Set Up” tab.
— While the camera is connected to a computer via
the USB cradle
— While a slideshow is playing
— While playing back a voice recording file (EX-M20
only)
4. Use [̆] and [̄] to select “Auto Power Off”,
and then press [̈].
• See page 37 for information about how to use
menus.
36
GETTING READY
2. Press [MENU].
Using the On-screen Menus
[MENU]
Tab
Pressing [MENU] displays menus on the monitor screen
that you can use to perform various operations. The menu
that appears depends on whether you are in the REC
mode or the PLAY mode. The following shows an example
menu procedure in the REC mode.
MENU
[SET]
Mode selector
1. Turn on the camera,
DISP
and then align the
mode selector with
Settings
Selection cursor (indicates the
currently selected item)
“
” (REC) to enter the
[̆][̄][̇][̈]
REC mode.
• If you want to enter the
PLAY mode instead, you
would align the mode
selector with “
”
(PLAY).
37
GETTING READY
G Menu Screen Operations
3. Press [̇] or [̈] to select the tab you want,
and then press [SET] to move the selection
cursor from the tab to the settings.
When you want to do this:
Move between tabs
Do this:
Press [̇] and [̈].
Move from the tab to the
settings
4. Use [̆] and [̄] to
select the feature
whose setting you
want to configure,
and then press [̈].
Press [̄].
Move from the settings to
the tab
Press [̆].
Move between the settings
Press [̆] and [̄].
Display the options
available for a setting
Press [̈] or press [SET].
Press [̆] and [̄].
• Instead of pressing [̈],
you could also press
[SET].
Example: To select the
Select an option
“Flash” item.
Register an option
selection and exit the menu Press [SET].
screen
5. Use [̆] and [̄] to change the currently
Register an option
selected setting.
selection and return to the
menu screen
Press [̇].
Exit the menu screen
Press the [MENU] button.
38
GETTING READY
6. Perform one of the following operations to
apply the setting you configured.
Configuring Display Language and Clock
Settings
Be sure to configure the following settings before using the
camera to record images.
To do this:
Perform this key operation:
Press [SET].
Apply the setting and exit
the menu screen.
• Display language
• Home city
• Date Style
Apply the setting and
return to feature selection
in step 4.
Press [̇].
• Date and time
Apply the setting and
return to tab selection in
step 3.
1. Press [̇].
2. Use [̆] to move back up to
tab selection.
Note that the current date and time settings are used by
the camera to generate the date and time that are stored
along with image data, etc.
• See “Menu Reference” on page 173 for more information
about menus.
39
GETTING READY
IMPORTANT!
To configure display language and clock
settings
• The camera’s clock settings are cleared whenever
power is totally cut off. This can happen if the battery
goes dead while the camera is not being supplied
power by the USB cradle. The clock setting screen
will appear automatically the next time you turn on
power after the settings are cleared. Set the date
and time before using the camera.
1. Press the power button to turn on the camera.
2. Use [̆], [̄], [̇], and
[̈] to select the
language you want,
and then press [SET].
• The current date and time settings will be cleared if
the battery remains dead without being charged for
about two days.
• Recording images without configuring the clock
settings causes incorrect time information to be
registered. Be sure to configure the clock settings
before using the camera.
: Japanese
English
: English
Français : French
Deutsch : German
Español : Spanish
Italiano
Português : Portuguese
: Chinese (Complex)
: Italian
: Chinese (Simplified)
: Korean
40
GETTING READY
3. Use [̆], [̄], [̇], and
[̈] to select the
6. Use [̆] and [̄] to
change the date format
setting, and then press
[SET].
geographical area
where you live, and
then press [SET].
4. Use [̆] and [̄] to
select the name of the
city where you live,
and then press [SET].
Example: December 24, 2003
To display the date like this:
03/12/24
Select this format:
YY/MM/DD
DD/MM/YY
MM/DD/YY
24/12/03
12/24/03
5. Use [̆] and [̄] to select the summer time
(DST) setting you want, and then press [SET].
When you want to do this:
Select this setting:
Keep time using summer time
(Daylight Saving Time)
On
Off
Keep time using standard time
41
GETTING READY
7. Set the current date
and the time.
To do this:
Do this:
Change the setting at the current
cursor location
Press [̆] and [̄].
Press [̇] and [̈].
Move the cursor between settings
Toggle between 12-hour and 24-
hour timekeeping
Press [DISP].
8. Press [SET] to register the settings and exit
the setting screen.
42
|