Casio Watch AMW330B1AV User Manual

MA0904-EA  
�  
���  
Resin Components  
Allowing the watch to remain in contact with other items or storing it together with other  
items for long periods while it is wet can cause the color of the other items to transfer to  
the resin components of the watch. Be sure to dry off the watch thoroughly before storing  
it and make sure it is not in contact with other items.  
ENGLISH  
Be sure to keep all user documentation handy for future reference.  
Your watch may differ somewhat from the one shown in the illustration.  
Leaving the watch where it is exposed to direct sunlight (ultraviolet rays) for long periods  
or failure to clean dirt from the watch for long periods can cause it to become discolored.  
Friction caused by certain conditions (frequent external force, sustained rubbing, impact,  
etc.) can cause discoloration of painted components.  
If there are printed figures on the band, strong rubbing of the printed area can cause  
discoloration.  
Failure to clean dirt from the watch for long periods can cause fluorescent color to fade.  
Wash dirt off with water as soon as possible and then dry the watch.  
Semi-transparent resin parts can become discolored due to sweat and dirt, and if  
exposed to high temperatures for long periods.  
Contact an authorized CASIO Service Center to have resin components replaced. Note  
that you will be charged for replacement costs.  
Stopwatch hours  
To set the time  
1. Pull out the crown to the second click.  
Stopwatch minutes  
Hour  
Minutes  
This causes the second hand to stop.  
2. Set the hands by rotating the crown.  
Move the minute hand four or five  
minutes past the time you want to  
set, and then back it up to the proper  
setting.  
First click  
(setting day)  
3. Push the crown back in to the normal  
position to restart timekeeping.  
Natural Leather and Imitation Leather Bands  
To set the day  
Allowing the watch to remain in contact with other items or storing it together with other  
items while it is wet for long periods can cause the color of the other items to transfer to  
the natural leather or imitation leather band of the watch. Be sure to dry off the watch  
thoroughly before storing it and make sure it is not in contact with other items.  
Leaving a leather band where it is exposed to direct sunlight (ultraviolet rays) for long  
periods or failure to clean dirt from a leather band for long periods can cause it to  
become discolored.  
1. Pull out the crown to the first click.  
2. Set the day by rotating the crown.  
3. Push the crown back in to the normal  
position.  
Second click  
(setting time)  
Day  
Seconds  
Stopwatch seconds  
Crown  
(normal position)  
Avoid setting the day between 9:00  
p.m. and 1:00 a.m. (the day display  
may not change in the following day).  
Important!  
Subjecting a natural leather or imitation leather band to rubbing or dirt can cause color  
Using the Stopwatch  
transfer and discoloration.  
The stopwatch lets you measure elapsed time up to 11 hours, 59 minutes, 59 seconds.  
You can also correct the position of the stopwatch second hand when necessary.  
The illustration shows a time of 2 hours, 20 minutes, 40 seconds.  
Metal Components  
Failure to clean dirt from a metal band can lead to formation of rust, even if the band is  
stainless steel or plated. If the watch is exposed to sweat or water, wipe it thoroughly with  
a soft, absorbent cloth and then store it in a well-ventilated location to dry.  
To clean the band, use a soft toothbrush or similar tool to scrub it with a weak solution of  
water and a mild neutral detergent. Take care to avoid getting solution on the watch case.  
Do not try to perform stopwatch operations while the crown is pulled out either to  
the first or second click. If you try to press a button, you might accidentally cause  
the crown to rotate and change the current time or day setting.  
To measure elapsed time  
Bacteria and Odor Resistant Band  
1. Press A to start the stopwatch.  
The bacteria and odor resistant band protects against odor generated by the formation of  
bacteria from sweat, which ensures good comfort and hygiene. In order to ensure  
maximum bacteria and odor resistance, keep the band clean. Use an absorbent soft cloth  
to wipe the band clean of dirt, sweat, and moisture. The bacteria and odor resistant band  
suppresses the formation of organisms and bacteria. It does not protect against rash due  
to allergic reaction, etc.  
2. Press A to stop the stopwatch.  
You can resume the measurement operation by pressing A again.  
3. Press B to reset the stopwatch.  
Adjusting the Stopwatch Second Position  
Use of the stopwatch can cause the starting positions of the stopwatch minute hand  
and second hand to become misaligned. Use the following procedures to check hand  
alignment and to adjust the positions of the hands so they point to 12 o’clock when  
the stopwatch is reset.  
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage  
or loss suffered by you or any third party arising through the use of this product or its  
malfunction.  
To adjust the positions of the stopwatch hands  
1. Press B to reset the stopwatch, and check the alignment of the stopwatch minute  
hand and second hand.  
2. Pull out the crown to the second click.  
3. Press A to move the stopwatch second hand forward until it points to 12 o’clock.  
4. If the stopwatch minute hand is aligned correctly, proceed to step 5. If the  
stopwatch hour hand and stopwatch minute hand are also misaligned, press B so  
the stopwatch minute hand jumps to 0.  
5. After making the adjustments you want, push the crown back in to its normal position.  
Note that pulling the crown out also stops the timekeeping second hand. After  
performing the above procedure, you should also adjust the timekeeping setting.  
User Maintenance  
Caring for Your Watch  
A dirty or rusty case or band can soil the sleeve of your clothing, cause skin irritation, and  
even interfere with watch performance. Be sure to keep the case and band clean at all  
times. Rust tends to form easily after the watch is exposed to seawater and then left  
without cleaning.  
For a watch with an elapsed time bezel  
Rotate the elapsed time bezel to align the  
minute hand.  
Sometimes a smudge like pattern may appear on the surface of a resin band. This will  
not have any affect on your skin or clothing. Wipe the band with a cloth to clean it.  
Keep a leather band clean by wiping it with a dry cloth. Both resin bands and leather  
band can become worn and cracked over time when subjected to normal daily use.  
Should your band become badly cracked or worn, be sure to have it replaced with a new  
one. Request band replacement from your original retailer or an authorized CASIO  
Service Center. Note that you will be charged for band replacement costs, even if your  
watch is still covered by its warranty.  
10  
mark with the  
50  
2 0  
After certain amount of time elapsed, read the graduation on  
the elapsed time bezel which the minute hand points to.  
The elapsed time is indicated.  
4 0  
3 0  
Elapsed time bezel  
Remember that you wear your watch next to your skin, just like a piece of clothing.  
Because of this, you should always keep your watch clean. Use a soft, absorbent cloth to  
wipe off any dirt, sweat, water, or other foreign matter from the case and band.  
Some water resistant models are equipped with a screw lock  
crown.  
With such models, you must unscrew the crown in the  
direction noted in the illustration to loosen it before you can  
pull it out. Do not pull too forcibly on such crowns.  
Also note that such watches are not water resistant while  
their crowns are loosened. Be sure to screw the crowns  
back in as far as they will go after making any setting.  
Dangers of Poor Watch Care  
Rust  
Though the stainless steel used for the watch is highly rust-resistant, rust can form if the  
watch is not cleaned after it becomes dirty. Failure of oxygen to come into contact with  
the metal because it is dirty causes breakdown of the oxidization layer on the metal  
surface, which leads to the formation of rust.  
Even if the surface of the metal appears clean, sweat and rust in crevasses can soil the  
sleeves of clothing, cause skin irritation, and even interfere with watch performance.  
Specifications  
Premature Wear  
Accuracy at normal temperature: ± 20 seconds a month  
Leaving sweat or water on a resin band or storing it an area subject to high moisture can  
Display: 3 analog hands (timekeeping hour and minutes, stopwatch seconds),  
lead to premature wear, cuts, and breaks.  
3 dials (timekeeping seconds, stopwatch hours and minutes), day  
Skin Irritation  
Stopwatch function: Measuring capacity: 11:59'59''/Measuring unit: 1 second  
Individuals with sensitive skin or in poor physical condition may experience skin irritation  
when wearing a watch. Such individuals should keep their leather band or resin band  
particularly clean, or switch to a metal band. Should you ever experience a rash or other  
skin irritation, immediately remove the watch and contact a skin care professional.  
Measuring modes: Elapsed time  
Battery: One silver oxide battery (Type: SR927W)  
Approximately 2 years on type SR927W (assuming one stopwatch operation 60 min./day)  
Battery Replacement  
Leave battery replacement up to your original retailer or authorized CASIO Service  
Center.  
Have the battery replaced only with the type specified by in this manual. Use of another  
type of battery can cause malfunction.  
Operating Precautions  
When replacing the battery, also request a check for proper water resistance. Note that  
Water Resistance  
you will be charged separately for water resistance inspection.  
The following applies to watches with WATER RESIST or WATER RESISTANT marked  
Initial Battery  
on the back cover.  
The battery that comes loaded in your watch when you purchase it is used for function  
and performance testing at the factory.  
Enhanced Water Resistance Under  
Daily Use  
Water  
This type of test battery may go dead quicker than the normally rated battery life as noted  
in the User’s Guide. Note that you will be charged for replacement of this battery, even if  
replacement is required within the watch’s warranty period.  
Resistance  
Under Daily  
Use  
5
10  
20  
Atmospheres Atmospheres Atmospheres  
On watch front or  
on back cover  
Hand washing, rain  
No  
Low Battery Power  
Marking  
5BAR  
10BAR  
20BAR  
BAR mark  
Low battery power is indicated by large timekeeping error, when display contents are  
Yes  
No  
No  
No  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
dim, or when the display does blank.  
Operation while battery power is low can result in malfunction. Replace the battery as  
soon as possible.  
Water-related work, swimming  
Example of  
Daily Use Windsurfing  
Skin diving  
No  
Do not use this watch for scuba diving or other types of diving that requires air tanks.  
Watches that do not have WATER RESIST or WATER RESISTANT marked on the back  
cover are not protected against the effects of sweat. Avoid using such a watch under  
conditions where it will be exposed to large amounts of sweat or moisture, or to direct  
splashing with water.  
Even if a watch is water-resistant, do not operate its buttons or crown while it is  
submersed in water or wet.  
Even if a watch is water-resistant, avoid wearing it in the bath or in areas where  
detergents (soap, shampoo, etc.) are being used. Such conditions can reduce water  
resistance.  
After submersion in seawater, use plain water to rinse all salt and dirt from the watch.  
In order to maintain water resistance, have the gaskets of your watch replace periodically  
(about once every two or three years).  
A trained technician will know how to check your watch for proper water resistance  
whenever you have its battery replaced. Battery replacement requires the use of special  
tools. Always request battery replacement from your original retailer or from an  
authorized CASIO Service Center.  
Some water-resistant watches come with fashionable leather bands. Avoid swimming,  
washing, or any other activity that causes direct exposure of a leather band to water.  
The inside surface of the watch glass may fog when the watch is exposed to a sudden  
drop in temperature. No problem is indicated if the fogging clears up relatively quickly. If  
the fogging does not clear or if water has gotten into the watch, take the watch in for  
repair immediately.  
Continued use of the watch with water inside can result in damage to electronic and  
mechanical components, the face of the watch, etc.  
Band  
Tightening the band too tightly can cause you to sweat and make it hard for air to pass  
under the band, which can lead to skin irritation. Do not fasten the band too tightly. There  
should be enough room between the band and your wrist so you can insert your finger.  
Deterioration, rust, or corrosion of the band can cause it to break, which may result in the  
watch falling off your wrist and becoming lost. Be sure to take good care of the band and  
keep it clean. Should you notice any breakage, discoloration, looseness or other problem  
with the band, immediately contact your original retailer or an authorized CASIO Service  
Center to have it checked, repaired, or replaced. Note that you will be charged for any  
repair or replacement of the band.  
Temperature  
Never leave the watch on the dashboard of a car, near a heater, or in any other location  
that is subject to very high temperatures. Do not leave the watch where it will be exposed  
to very low temperatures, either. Temperature extremes can cause the watch to lose or  
gain time, to stop, or otherwise malfunction.  
Impact  
Your watch is designed to withstand impact incurred during normal daily use and light  
activity such as playing catch, tennis, etc. Dropping the watch or otherwise subjecting it  
to strong impact, however, can lead to malfunction.  
Note that watches with shock-resistant designs (G-SHOCK, Baby-G, G-ms) can be worn  
while operating a chain saw or engaging in other activities that generate strong vibration,  
or while engage in strenuous sports activities (motocross, etc.).  
Magnetism  
The hands of analog and combination (analog-digital) watches are moved by a motor that  
uses magnetic force. When such a watch is close to a device (audio speakers, magnetic  
necklace, cell phone, etc.) that emits strong magnetism, the magnetism can cause  
timekeeping to slow down, speed up, or stop, resulting in the incorrect time being  
displayed.  
Electrostatic Charge  
Exposure to very strong electrostatic charge can cause the watch to display the wrong  
time. Very strong electrostatic charge even can damage electronic components.  
Chemicals  
Do not allow the watch to come into contact with thinner, gasoline, solvents, oils, or fats,  
or with any cleaners, adhesives, paints, medicines, or cosmetics that contain such  
ingredients. Doing so can cause discoloration of or damage to the case, resin band,  
leather band, and other parts.  
Storage  
If you do not plan to use the watch for a long time, wipe it thoroughly free of all dirt,  
sweat, and moisture, and store it in a cool, dry place.  
 

Black Decker Network Card CA DHWK User Manual
Blaupunkt Car Stereo System VR 6000 User Manual
Bose MP3 Docking Station SoundDock Series III User Manual
Boss Audio Systems Car Stereo System 865DBI User Manual
Brother All in One Printer MFC J5910DW User Manual
Bushnell Binoculars 13 7507 User Manual
ButtKicker Stereo Amplifier R7H BKLINK R User Manual
Cambridge Audio MP3 Docking Station ID10 User Manual
Canon Camera Lens 0284B002 User Manual
Chief Manufacturing Indoor Furnishings FTR Series User Manual