Casio Watch MA1410 EB User Manual

MA1410-EB  
© 2014 CASIO COMPUTER CO., LTD.  
User’s Guide 5412 (OC)  
ENGLISH  
Congratulations upon your selection of this CASIO watch.  
x Keep the watch’s face exposed to light as much as possible (page E-4).  
x For details about how to use this watch and for troubleshooting information, go to the website below.  
x Do not try to remove the rechargeable battery from this watch. Always be sure to request rechargeable  
battery replacement from your retailer. Use of a non-specified battery type and/or incorrect  
replacement creates the risk of burn injury and fire due to explosion, overheating, ignition, etc.  
Important!  
x For details about how to adjust the current time zone, time, and day settings, see “Timekeeping  
(Current Time and Day Adjustment)” (Page E-6).  
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered by  
you or any third party arising through the use of your watch or its malfunction.  
B
E-1  
Features  
Contents  
Your watch provides you with the features and functions described below.  
Features .............................................................................................................................................. E-2  
Charging the Watch............................................................................................................................ E-4  
Timekeeping (Current Time and Day Adjustment)............................................................................. E-6  
Solar powered operation........................................................................................Page E-4  
The watch generates electrical power from sunlight and other types of light, and uses it to charge a  
battery that powers operation.  
Timekeeping (Based on GPS Signals)................................................................................................ E-8  
Appropriate Signal Reception Location (GPS Signal) ..................................................................... E-8  
Performing a GPS Signal Receive Operation Manually................................................................... E-9  
GPS Signal Auto Receive ........................................................................................................... E-11  
Accurate timekeeping.............................................................................................Page E-6  
Timekeeping is kept accurate using GPS signals and time calibration signals.  
Current time in cities around the globe...............................................................Page E-14  
View the current time in 40 time zones around the globe.  
Timekeeping (Based on a Time Calibration Signal)......................................................................... E-12  
Appropriate Signal Reception Location (Time Calibration Signal).................................................. E-12  
Time Calibration Signal Auto Receive.......................................................................................... E-13  
Stopwatch..............................................................................................................Page E-15  
The stopwatch measures elapsed time up to 24 minutes in 0.05-second increments.  
Mode Reference Guide..................................................................................................................... E-14  
Using the Watch in an Aircraft (Airplane Mode)............................................................................ E-16  
Using the Crown........................................................................................................................ E-17  
Specifications ................................................................................................................................... E-18  
E-2  
E-3  
x If timekeeping stops, you will need to expose the watch to light for a number of hours before it will  
restart.  
Charging the Watch  
x The watch will not charge if its temperature is –10°C (14°F ) or lower, or around 60°C (140°F ) or  
higher.  
x If the watch is not charged for more than about three months after it stops running due to low power,  
over-discharge will occur, which may make recharging impossible.  
x While wearing the watch, take care so your sleeve does not block its face  
(solar panel) from light. Charging efficiency may be reduced if the face (solar  
panel) is blocked from light, even partially.  
x When you are not wearing the watch, leave it where its face (solar panel) is  
exposed to bright light for charging.  
x To help ensure stable operation, expose the face of the watch to about a half  
day of direct sunlight each week to charge it.  
Caution  
x The case of the watch may become extremely hot when charging. Guard against burn injury.  
Important!  
x If the watch is not exposed to light for long periods, it will disable some functions and eventually stop  
timekeeping.  
x The second hand will jump at two-second or five-second intervals to indicate that battery power is low,  
and stop completely when the battery is dead. Note that the watch also has a power saving function.  
For details, see the Operation Guide available at the CASIO website.  
E-4  
E-5  
x Even if you are unable to perform a GPS signal and/or time calibration signal receive operation for  
some reason, the watch will keep time with average monthly accuracy of 15 seconds.  
Timekeeping (Current Time and Day Adjustment)  
Important!  
x If the current time and day setting is wrong after you perform one of the procedures under “Time  
Calibration Signal Auto Receive”, “GPS Signal Auto Receive”, or “Receiving GPS Time Information”, try  
acquiring position information (GPS) and then perform the time/day setting procedure again.  
x If you feel that the current time and/or day indicator are not in the correct positions, you can adjust  
their alignment. For details, see the Operation Guide available at the CASIO website.  
x Time calibration signal reception is normally possible in the areas below.  
Japan, China, North America, Europe  
For details, see the Operation Guide available at the CASIO website.  
x For details about the following operations, see the Operation Guide available at the CASIO website:  
Configuring Home City (time zone), summer time, current time, and current day settings manually.  
After purchasing the watch, perform the procedure under “Acquiring GPS Position Information”  
(page E-9).  
To set the current time and day, normally use the procedure under “Time Calibration Signal Auto  
Receive” (page E-13). In areas where a time calibration signal cannot be received for some reason,  
set the current time and day using the procedure under “GPS Signal Auto Receive” (page E-11).  
x Late night (between midnight and 5:00 a.m.): The receive operation starts at regular intervals until  
receive is successful (Time Calibration signal).  
x Daytime (between 6:00 a.m. and 10:00 p.m.): The receive operation will start automatically when  
the watch is continually expose to light (GPS).  
x Once a time calibration or GPS signal receive operation is successful, no more Auto Receive  
operations are performed that day.  
If the current time setting is not correct, perform the procedure under “Receiving GPS Time  
Information” (page E-10).  
If you move into another time zone, perform the procedure under “Acquiring GPS Position  
Information”. Next, perform one of the procedures under “Time Calibration Signal Auto  
Receive”, “GPS Signal Auto Receive”, or “Receiving GPS Time Information” to set the current  
time and day.  
x GPS and time calibration signal reception is not possible when the watch’s temperature is less  
than approximately –10°C (14°F) or greater than approximately 60°C (140°F).  
E-6  
B
B
E-7  
 
User’s Guide 5412 (OC)  
Using the Watch in an Aircraft (Airplane Mode)  
Using the Crown  
x Switch to the Airplane Mode whenever you are inside an aircraft or in any other area where radio wave  
reception is prohibited or restricted.  
x You can change the following settings by operating the watch’s crown: World Time City (time zone),  
Home City (time zone), summer time (DST), and current time.  
x Entering the Airplane Mode disables GPS signal and time calibration signal reception.  
x While in the Timekeeping Mode, you can enter or exit the Airplane Mode by holding down C for at  
least four seconds. If you are in another mode, the watch will enter the Timekeeping Mode about  
two seconds after you hold down C. Keep the button depressed and the watch will enter or exit the  
Airplane Mode.  
x For details about crown operations, see the Operation Guide available at the CASIO website.  
Important!  
x In order to prevent loss of water resistance and damage due to impact, make sure that the crown is  
fully pushed in to its normal position when using the watch.  
Normal Timekeeping  
Airplane Mode  
Hold down C for  
4 seconds.  
Mode hand  
Mode hand  
E-16  
B
E-17  
Other: Power Saving; Low battery alert; Auto Correction of Hand Home Positions  
Specifications  
Power Supply: Solar panel and one rechargeable battery  
Approximately 7 months  
Not exposed to light under the conditions below.  
GPS time information receive: 1 operation (approximately 10 seconds) every 2 days  
GPS position information receive: 1 operation (approximately 36 seconds)/month  
Accuracy at normal temperature: 15 seconds a month (no adjustment by signal information)  
Timekeeping : Hour, minutes, seconds, 24-hour, day, day of the week  
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099  
Other: Home City (Time Zone) and World Time City (Time Zone) can be assigned one of 40 time zones  
and Coordinated Universal Time; Daylight Saving Time (summer time)/Standard Time auto  
switching  
Signal receive function: GPS signal auto receive, manual receive (position information, time  
information)  
Time calibration signal auto receive  
Auto transmitter selection (for JJY, MSF/DCF77)  
Receivable call signs: JJY (40 kHz/60 kHz), BPC (68.5 kHz), WWVB (60 kHz), MSF (60 kHz),  
DCF77 (77.5 kHz)  
Last reception result display  
Manual and auto standard time/summer time switching  
Stopwatch: Measuring capacity: 23'59.95"  
Measuring unit: 1/20 (0.05) seconds  
Measuring modes: Elapsed time  
E-18  
E-19  
 

Belkin Switch F1DF102P User Manual
Black Decker Stud Sensor FSSF100 User Manual
Briggs Stratton Portable Generator Home Generator Systems User Manual
Bushnell Telescope 789565 User Manual
Cable Electronics Switch HS103 User Manual
Casio Digital Camera EX Z155 User Manual
Casio Printer KL 750 User Manual
Chevrolet Automobile 2009 Traverse User Manual
Cisco Systems IP Phone OL 15499 01 User Manual
Cisco Systems Modem MICA 6MOD User Manual