Chicago Electric Microscope Magnifier 66384 User Manual

FLOURESCENT  
MAGNIFYING LAMP  
Model 66384  
ASSEMbLY ANd OPERATION INSTRUCTIONS  
Diagrams within this manual may not be drawn proportionally.  
Due to continuing improvements, actual product may differ slightly from the product described herein.  
®
distributed exclusively by Harbor Freight Tools .  
3491 Mission Oaks Blvd., Camarillo, CA 93011  
Visit our website at: http://www.harborfreight.com  
Read this material before using this product.  
Failure to do so can result in serious injury.  
SAVE THIS MANUAL.  
©
®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this  
manual or any artwork contained herein may be reproduced in any shape or form  
without the express written consent of Harbor Freight Tools.  
For technical questions or replacement parts, please call 1-800-444-3353.  
Revised manual 09a  
 
2. Unplug from outlet when not in use  
General Safety  
and before maintenance or cleaning.  
1. CAUTION! TO REdUCE RISK OF  
FIRE, USE ONLY CIRCLINE 22-  
WATT (or smaller) FLUORESCENT  
LAMPS.  
3. Do not operate with a damaged cord  
or plug or after the Lamp malfunc-  
tions or has been damaged in any  
manner. Return Lamp to the nearest  
authorized service facility for exami-  
nation, or repair.  
2. The use of any accessory attach-  
ments not recommended by the  
Lamp manufacturer may cause inju-  
ries.  
4. This Lamp has a polarized plug (one  
blade is wider than the other). To  
reduce the risk of electric shock, this  
plug is intended to fit into a polarized  
outlet only one way. If the plug does  
not fit fully in the outlet, reverse the  
plug. If it still does not fit, contact a  
qualified electrician. Do not change  
the plug in any way.  
3. Do not place under direct sunlight.  
4. Do not use Lamp for other than in-  
tended use.  
5. Maintain labels and nameplates on  
the appliance. These carry important  
safety information. If unreadable or  
missing, contact Harbor Freight Tools  
for a replacement.  
5. Do not use in a damp or wet location.  
Power Cord Safety  
6. Do not stare at bright light or the sun  
through the Lamp’s magnifying lens.  
1.  
A short power supply cord is to be  
provided to reduce risks resulting  
from becoming entangled in or trip-  
ping over a longer cord.  
7. Do not obstruct walkways or common  
areas with Lamp or cord.  
8. This Lamp is not a toy. Keep it out of  
reach of children when children are  
not being closely supervised.  
2.  
3.  
Longer extension cords are available  
and may be used if care is exercised  
in their use.  
9. The warnings, precautions, and in-  
structions discussed in this instruction  
manual cannot cover all possible con-  
ditions and situations that may occur.  
It must be understood by the operator  
that common sense and caution are  
factors which cannot be built into this  
product, but must be supplied by the  
operator.  
If a long extension cord is used,  
a. the marked electrical rating of the  
(detachable power supply cord or)  
extension cord should be at least as  
great as the electrical rating of the  
Lamp,  
b. if the Lamp is of the grounded type,  
the extension cord should be a  
grounding type 3-wire cord, and  
SAVE THESE  
INSTRUCTIONS.  
c. the longer cord should be arranged  
so that it will not drape over the  
counter top or tabletop where it can  
be pulled on by children or tripped  
over.  
SKU 66384  
For technical questions, please call 1-800-444-3353.  
Page 3  
 
SPECIFICATIONS  
Electrical Requirements  
120 V~ / 60 Hz  
ABS plastic frame  
Glass lens  
Material  
Power  
Switch  
3D (Diopter)  
= to 1.75 X magnification  
Magnification  
Bulb Type  
22W Circline Fluorescent  
Lamp  
Cord Length  
4’ - 9”  
38”  
Full Extended Height  
Fig. 1  
2. Turn on the Lamp by pushing down  
on the black rocker Power Switch  
(35) found on top of the Lamp behind  
the Lens Cover (49). (See Fig. 1.)  
UNPACKING  
When unpacking, check to make sure  
that the item is intact and undamaged. If  
any parts are missing or broken, please  
call Harbor Freight Tools at the number  
shown on the cover of this manual as soon  
as possible.  
Lens  
Lens Frame  
(34)  
Cover  
(49)  
OPERATION  
Read the ENTIRE IMPORTANT  
SAFEGUARdS section at the  
beginning of this manual  
including all text under  
5" Lens (43)  
subheadings therein before set  
up or use of this Lamp.  
1. Although this Power Cord (12) is sup-  
plied with a two-prong polarized plug,  
it can be plugged into any 120V two  
or three prong outlet.  
Fig. 2  
3. To use the Magnifying Lamp, pull  
open the Lens Cover (49) from the  
Lens Frame (34). (See Fig. 2.)  
4. Use the Adjusting Knob (31) to set  
the desired angle.  
5. After each use, shut the Lens Cover  
(49) and remove the Power Cord (12)  
from the outlet.  
6. Store Lamp in a safe location out of  
the reach of children.  
REV 09e  
SKU 66384  
For technical questions, please call 1-800-444-3353.  
Page 4  
 
REPLACING THE bULb  
22W Circline  
bulb (46)  
When replacing the Lamp bulb  
(46), be sure to wear ANSI-  
approved safety goggles. Also,  
keep track of the eight Screws  
(48) during replacement. The  
Screws are very small and can  
be swallowed by young  
bulb Clip (47)  
children.  
1. To replace the 22W Circuline Bulb  
(46), turn off the Lamp and unplug  
the Power Cord (12) from the outlet.  
Fig. 4  
5. Remove the Bulb Clips (47) by un-  
screwing the screws holding the clips  
with a #1 Phillips screwdriver. (See  
Fig. 4.)  
2. Lay the Lamp down and loosen the  
Adjusting Knob (31) so that the Lamp  
rests flat on the work surface with the  
Bulb facing up.  
bulb Socket (44)  
Screws  
bulb (46)  
bulb Prongs  
Clear  
Cover (45)  
Fig. 5  
Screws  
Fig. 3 / Lamp Head Assembly  
6. Pull the Circline Bulb (46) prongs out  
of the square Bulb Socket (44). (See  
Fig. 5.)  
3. Use a #1 Phillips screwdriver (not  
included) to remove the five Screws  
(48) from the Clear Cover (45). (See  
Fig. 3.)  
7. Dispose of old Bulb properly and  
install a new 22W Circline Bulb  
by aligning the Bulb Prongs to the  
Lamp Socket openings and push the  
prongs securely into the socket.  
4. Lift the Clear Cover (45) away from  
the Lens Frame (34). Please note:  
The Bulb Clips also hold the 5" Lens  
in place, so when removed, the Lens  
is loose and could fall out if the lamp  
head is turned over.  
SKU 66384  
For technical questions, please call 1-800-444-3353.  
Page 5  
 
INSPECTION ANd  
MAINTENANCE  
TO PREVENT  
SERIOUS INjURY  
FROM ACCIdENTAL  
WARNING  
Circline bulb (46)  
bulb  
Socket (44)  
OPERATION OR ELECTRIC  
SHOCK:  
before appliance inspection  
or maintenance, make sure  
the Power Switch (12) is  
turned off, the cord is  
unplugged, and the bulb has  
cooled.  
Lens Frame (34)  
Fig. 6.)  
8. Fasten the Bulb Support Latch back  
into place. (See Fig. 6.)  
TO PREVENT SERIOUS  
INjURY FROM APPLIANCE  
FAILURE:  
9. Lower the Bulb into place in the Lens  
Frame (34).  
do not use damaged Lamp.  
Have the problem corrected  
before further use.  
10. Re-attach the three Bulb Clips (47)  
and screws securing the Bulb back in  
the Lens Frame.  
1. bEFORE EACH USE, inspect the  
general condition of the Magnifying  
Lamp. Check for loose screws, mis-  
alignment or binding of moving parts,  
cracked or broken parts, damaged  
electrical wiring, and any other condi-  
tion that may affect its safe operation.  
11. Place the Clear Cover (45) back onto  
the Lens Frame and align the screw  
holes.  
12. Fasten the Clear Cover back onto  
the Lens Frame using the five screws  
removed earlier. Do not overtighten.  
2. Wipe off lamp with a soft, moist cloth  
regularly to prevent dust accumula-  
tion.  
13. Once all connections are secure, set  
the Magnifying Lamp upright and on  
its base. Adjust the tilt/angle of the  
Lamp head and tighten the adjusting  
knob.  
PLEASE REAd THE FOLLOWING CAREFULLY  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy DIAGRAM IN  
THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy  
REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS  
TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE  
MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD  
BE UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyER. THE BUyER ASSUMES ALL  
RISK AND LIABILITy ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS  
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.  
SKU 66384  
For technical questions, please call 1-800-444-3353.  
Page 6  
 
PARTS LIST ANd ASSEMbLY dIAGRAM  
20  
21  
23  
24  
25  
26 27  
28  
29  
30 31  
22  
49  
19  
32  
18  
17  
16  
33  
34  
35  
36  
12  
15  
37  
38  
39  
14  
13  
40  
41  
42  
11  
10  
9
45  
46  
48  
44  
47  
43  
8
7
Part description  
Part description  
1
Handle  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
Bolt  
6
2
Screw  
Upper Pressure Strip  
Left Pressure Strip  
Right Pressure Strip  
Electric Gasket  
Adjusting Knob  
Connector  
5
3
Metal Bracket  
Fixing Plate  
Clip  
4
5
6
Down Pressure Strip  
Washer  
4
3
7
8
Rivet Joint Screw  
Elastomeric Gasket  
Lens Frame  
Power Switch  
Strain Relief  
Electric Ballast  
Space Washer  
Under Cover  
Locknut  
2
1
9
No. 1 Wire Protective Casing  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
No. 3 Wire Protective Casing  
Arm 3  
Power Cord  
Bolt  
Pressure Spring  
Arm 4  
Spring Seat  
Wire Sleeve  
Bolt  
Mandril  
Tension Spring  
Upper Arm Tension Bracket  
Center Pressure Strip  
Pin  
5" Lens  
Bulb Socket  
Clear Cover  
22W Circline Bulb  
Bulb Clip  
No. 2 Wire Protective Casing  
Arm 1  
Screws - 8  
Arm 2  
Lens Cover  
Washer  
SKU 66384  
For technical questions, please call 1-800-444-3353.  
Page 7  
 
LIMITEd 90 dAY WARRANTY  
Harbor Freight Tools Co. makes every effort to assure that its products meet high  
quality and durability standards, and warrants to the original purchaser that this prod-  
uct is free from defects in materials and workmanship for the period of 90 days from  
the date of purchase. This warranty does not apply to damage due directly or indirectly,  
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities,  
criminal activity, improper installation, normal wear and tear, or to lack of maintenance.  
We shall in no event be liable for death, injuries to persons or property, or for incidental,  
contingent, special or consequential damages arising from the use of our product. Some  
states do not allow the exclusion or limitation of incidental or consequential damages, so  
the above limitation of exclusion may not apply to you. THIS WARRANTy IS ExPRESS-  
Ly IN LIEU OF ALL OTHER WARRANTIES, ExPRESS OR IMPLIED, INCLUDING THE  
WARRANTIES OF MERCHANTABILITy AND FITNESS.  
To take advantage of this warranty, the product or part must be returned to us with  
transportation charges prepaid. Proof of purchase date and an explanation of the com-  
plaint must accompany the merchandise. If our inspection verifies the defect, we will ei-  
ther repair or replace the product at our election or we may elect to refund the purchase  
price if we cannot readily and quickly provide you with a replacement. We will return re-  
paired products at our expense, but if we determine there is no defect, or that the defect  
resulted from causes not within the scope of our warranty, then you must bear the cost  
of returning the product.  
This warranty gives you specific legal rights and you may also have other rights  
which vary from state to state.  
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353  
Record Product’s Serial Number Here:  
Note: If product has no serial number, record month and year of purchase instead.  
Note: Some parts are listed and shown for illustration purposes only, and are not avail-  
able individually as replacement parts.  
SKU 66384  
For technical questions, please call 1-800-444-3353.  
Page 8  
 

Blue Rhino Patio Heater GWU501E User Manual
Bodum Grinder 10993 User Manual
Bosch Appliances GPS Receiver TTO215 User Manual
Bowers Wilkins Speaker CDM7 User Manual
Brinly Hardy Lawn Aerator AS 30 BH User Manual
Bush Hog Compact Loader 2446QT User Manual
Campbell Hausfeld Nail Gun JB349500 User Manual
Carrier Air Conditioner 38AKS028 044 User Manual
Carrier Refrigerator 30HK User Manual
Casablanca Fan Company Fan 55063 User Manual