Chicago Electric Patio Furniture 91761 User Manual

WHITE PVC  
TRELLIS  
91761  
ASSEMBLY INSTRUCTIONS  
®
3491 Mission Oaks Blvd., Camarillo, CA 93011  
®.  
Copyright © 2004 by Harbor Freight Tools  
All rights reserved. No portion of this  
manual or any artwork contained herein may be reproduced in any shape or form  
without the express written consent of Harbor Freight Tools.  
For technical questions and replacement parts, please call 1-800-444-3353  
 
10. Warning: LocateTrelllis in a spot that is flat without an uneven surface, away from  
electrical wires. Caution: Heavy winds could make the Trellis unstable.  
11. Always distribute objects on Bench evenly. Uneven weight distribution could  
cause toppling. Do not allow children to climb on theTrellis.  
Warning:The warnings, cautions, and instructions discussed in this instruction  
manual cannot cover all possible conditions and situations that may occur. It must  
be understood by the operator that common sense and caution are factors which  
cannot be built into this product, but must be supplied by the operator.  
Unpacking  
When unpacking, check to make sure the following parts are included. If any parts are  
missing or broken, please call Harbor Freight Tools at the number on the cover of this  
manual.  
Assembly Instructions  
1. Assemble all parts on a smooth surface to avoid scratching. These parts fit  
together and no hardware is required.  
2. “Ladder”Assembly: Use Cross Beams (2) and Bars (3) to form “ladder”.  
Set aside. See Figure A.  
3. “Side Lattice” Assembly: Use four Bars (4) (horizontally), three Bars (5)  
(vertically) with two Bars (11) (horizontally) at the top and bottom to build the  
“lattice” assembly. Repeat instructions for the second side “lattice”.  
See Figure B.  
4. Still working with the parts on the ground, fit the Support Bar (7) between  
the Posts (6). Fit the side “lattice” assembly between the two Posts (6). Repeat  
for second side, “lattice” with Posts. Be sure all connections are secure.  
See Figure B.  
Post (6)  
Cross  
Beams (2)  
Bars (4)  
(horizontal)  
Bars (3)  
Bars (11)  
(horizontal)  
Bars (5)  
(vertical)  
Bars (11)  
(horizontal)  
Support Bar  
(7)  
Figure A  
Figure B  
SKU 91761 For technical questions, please call 1-800-444-3353. Page 3  
 
5. Choose your location: The location site should be a flat, even surface (three  
possible set-up options: 1.) The Trellis can be free standing but caution  
should be taken: Always distribute weight evenly on the bench to  
prevent toppling. 2.) Stand the Trellis upright and place in 6” deep holes.  
Test that the Trellis is level. Pack dirt around Posts (6). 3.) Place cement in the  
holes before positioning the Posts (6). Test that the Trellis is level. If you are  
not experienced in setting up this type of product, it is recommended that you  
seek the assistance of a qualified handyman for placement of your Trellis.  
6. Place the assembled sides of the Trellis flat on the ground nearest to the  
location. With an assistant, insert the “ladder assembly” into the Posts (6).  
See Figure C.  
Gothic Cap (1)  
Post (6)  
Ladder  
Assembly  
Figure C  
Figure E  
Clamps  
Bench (8)  
Metal  
Bars  
Support  
Bar (7)  
Figure D  
Figure F  
7. There must be metal bars inserted in the two Braces (8) to support the weight  
placed on the Bench (8). See Figure D. Snap the Bench (8) over the Support  
Bar (7). See Figure F–G.  
8. Tap the Gothic Caps (1) on the end of each Post (6). See Figure C.  
SKU 91761 For technical questions, please call 1-800-444-3353. Page 4  
 
9. Place Covers (9) (not shown) over the ends of the “ladder” that are exposed.  
Place the Covers (10) (not shown) over the Brace (8) pieces of the Bench.Tap  
into place. See Figure F.  
10. After assembly of theTrellis is complete, test that the product is solid and stable  
before using theTrellis.  
Cover (9)  
Bench (8)  
Cover (10)  
Support  
Bar (7)  
Figure G  
Figure H  
Parts List  
Part #  
Description  
Qty.  
4” X4” Gothic Cap  
1
2
3
4
5
6
7
8
9
4
2
9
8
6
4
2
2
4
4
4
62” x 2” x 3-1/2” Cross Beam  
21” X 1-1/2” x 1-1/2” Bar  
25” x 1-1/2” x 1-1/2” Bar  
47.5” x 13/16” x 1” Bar  
89” x 4” x 4” Post  
20-1/2” x 2” x 3-1/2” Support Bar  
59” x 2” x 6” Bench  
2 x 3-1/2” Cover  
2” x 6” Cover  
25” x 1-1/2” x 1-1/2” x 1-1/2” Bar  
10  
11  
SKU 91761 For technical questions, please call 1-800-444-3353. Page 5  
 
Assembly Drawing  
(2)  
(1)  
(9)  
(11)  
(5))  
(3)  
(4)  
(10)  
(8)  
(6)  
(7)  
PLEASE READ THE FOLLOWING CAREFULLY  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDEDTHE PARTS DIAGRAM INTHIS MANUAL AS  
A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY  
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO  
MAKE ANY REPAIRSTOTHE PRODUCT ORTHAT HE OR SHE IS QUALIFIEDTO REPLACE ANY PARTS OF  
THE PRODUCT. IN FACT,THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATESTHat ALL  
REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED  
TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT  
OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR  
ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTSTHERETO.  
NOTE: Some parts are listed and shown for illustration purposes only and are not  
available individually as replacement parts.  
SKU 91761 For technical questions, please call 1-800-444-3353. Page 6  
 

Blackberry Cell Phone 7290 User Manual
Black Box Musical Toy Instrument fmt700 User Manual
Black Decker Cordless Drill FS2402D User Manual
Bosch Power Tools Saw 0601584651 User Manual
Brookstone Headphones E5 User Manual
Cabletron Systems Switch ELH100 User Manual
Cadence Stereo Amplifier ZRS C4 User Manual
Califone Headphones 2924AVG User Manual
Califone Headphones CLS725 User Manual
Carrier Refrigerator XRV User Manual