Cisco Systems IP Phone OL 19470 01 User Manual

C H A P T E R  
13  
Generating Audio Phone and Video Phone  
Reports  
An IP phone has a physical relationship with a switch and a logical relationship with a Cisco Unified  
Communications Manager. Phone reports provide a combined view of both of these relationships,  
making it easy for you to track and resolve IP phone and video phone problems. Operations Manager  
collects phone inventory data as scheduled (see Working with IP Phone Discovery, page 16-40) and  
collects additional data every 5 minutes to determine whether phone status has changed. Audio Phones  
and Applications reports provide detailed phone inventory and status information. If you have the  
required software license, you can also view similar reports for video phones.  
This section includes the following topics:  
Using Audio Phones and Applications Reports  
Note  
Audio Phones and Applications reports do not include data for video phones. See Using Video Phones  
Audio Phones and Applications reports provide inventory and IP status change reports:  
Inventory reports—Provide detailed IP phone data, reflecting the current status of IP phones in your  
network. These reports enable you to search for a few phones, list a specific set of phones—such as  
phones connected to a switch, phones in SRST mode and phones that are CTI applications—or view  
all phones and lines:  
Search—Use Search to view information for a few IP phones or a single IP phone; search  
enables you to find phones using all or part of an extension number, IP address, or MAC address.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-1  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
IP Phone Audit—Use the IP Phone Audit report to obtain a summary of changes, including  
data for phones that have moved, been removed, undergone an extension number change,  
appeared in inventory with a duplicate MAC or IP address, or become suspect. See Using the IP  
For more information, see the following topics:  
Generating IP Phone Inventory Reports  
This topic includes the following:  
Searching for IP Phones  
Use Search to find one or only a few IP phones in your network. Search displays information for one  
phone at a time; you can page back and forth to view information for each phone when multiple phones  
are found. You can search for phones using all or part of an extension number, IP address, or MAC  
address.  
When you want to find many phones—for example, all phones registered with a Cisco Unified  
Communications Manager or all phones connected to a switch—use the Inventory Analysis report; see  
For information on how phone counts are displayed in Operations Manager windows, seeHow Are Phone  
Counts Displayed in Views and Reports?, page 1-19.  
Step 1  
Step 2  
Select Reports > Audio Phones and Applications > Search. The Find IP Phones page appears.  
In the Find IP Phones Where pane:  
a. Select one of the following:  
Extension number  
IP address  
MAC address  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-3  
 
   
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
b. Then select one of the following:  
is exactly  
begins with  
contains  
ends with  
c. Enter a value.  
Step 3  
Click View. The IP Phone Details dialog box appears, displaying the information described in the  
following table.  
Table 13-1  
IP Phone Details  
Row  
Description  
Extension  
Extension number of the IP phone; for example, 4000. Click the hyperlink to  
open the web interface on the IP phone (see Opening an IP Phone Web Interface,  
IP Address  
IP address of the IP phone; for example, 10.76.38.65. Click the hyperlink to see  
more details of the IP phone (see Using Audio Phones and Applications Reports,  
MAC Address  
MAC address of the IP phone; for example, 003094c40454, or  
00-30-94-c4-04-54. Click the hyperlink to open the web interface on the IP  
CCM Address  
Address of the Cisco Unified Communications Manager (CCM) with which the  
IP phone is registered; for example, 10.76.38.70.  
Switch Address  
IP address of the switch to which the IP phone is connected; for example,  
10.76.29.162.  
Switch Name  
Switch Port  
Port Status  
Switch to which the IP phone is connected.  
Switch port to which the IP phone is connected; for example, Fa0/12.  
Status of the switch port to which the IP phone is connected: up or down.  
Cisco Unified Communications Manager registration status of the IP phone:  
IP Phone Outage  
Status  
yes—The IP phone is registered with a Cisco Unified Communications  
Manager.  
no—The IP phone is not registered with a Cisco Unified Communications  
Manager.  
IP Phone Model  
Protocol  
Cisco IP phone model number; for example, 7902, 7905, 7910, 7912, 7920,  
7935, 7940, 7960, or 7970.  
Protocol the phone is using to communicate with Cisco Unified Communications  
Manager.  
Note  
Only SCCP and SIP phones will be discovered. H.323 and MGCP  
protocols are not currently supported.  
VLAN Name  
VLAN ID  
Name of the VLAN in the switch (a user-defined name); for example, voice.  
ID of the VLAN in the switch to which the IP phone is connected; for example,  
100.  
SRST Router  
IP address of the router that the phone is using for SRST.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-4  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Table 13-1  
IP Phone Details (continued)  
Row  
Description  
SRST Mode  
Can be one of the following:  
yes—The phone is in SRST mode  
no—The phone is not in SRST mode  
?—The phone is suspected to be in SRST mode  
–(dash)—The phone is not an SRST phone  
Serial No.  
IP phone serial number  
Note This information is obtained by phone polling. See Understanding Phone  
Identifier of the firmware running on the phone  
Application ID  
Load ID  
Note  
This information is obtained by phone polling. See Understanding Phone  
Identifier of the factory-installed load running on the phone  
Note  
This information is obtained by phone polling. See Understanding Phone  
Step 4  
Step 5  
To display the information in print-friendly format in a new browser window, click Print; print the  
information, using the browser print function.  
If search results include more than one phone, view them by clicking Next or Prev.  
For more information, see the following topics:  
Generating the Inventory Analysis Report  
Use Inventory Analysis to search for IP phones in your network and display them in a report.  
Before You Begin  
Inventory Analysis searches for phones using:  
An implicit “or” within each field—If you enter more than one value in a field, Inventory Analysis  
searches for phones that match any value that you entered.  
An implicit “and” for all fields—If you enter values in more than one field, Inventory Analysis  
searches for phones that match at least one value from each field.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-5  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
For example, if you enter two phone models, such as 7910 and 7935, in the IP Phone Model field, the  
Inventory Analysis report that results includes all phones of these models. If, in addition, you enter a  
VLAN ID and a switch, Inventory Analysis searches for phones that meet all these criteria; the report  
that results includes only phones of the models specified that are connected to the switch and in the  
VLAN that you selected.  
Step 1  
Step 2  
Select Reports > Audio Phones and Applications > Inventory Analysis. The Find IP Phones page  
appears.  
Enter values in one or more fields, described in the following table.  
GUI Element  
Description/Action  
Find IP Phones  
Where list boxes and  
field  
From left to right:  
Select one of the following:  
Extension number  
IP Address  
MAC Address  
Select one of the following:  
is exactly  
begins with  
contains  
ends with  
Enter a value.  
VLAN Name field  
VLAN ID field  
Enter the name of the VLAN.  
Enter the VLAN ID.  
Select one:  
IP Phone Outage  
status radio buttons  
Registered  
Unregistered  
All—Registered and unregistered phones.  
SRST radio buttons Select one:  
SRST—Configured to fail over to an SRST router in case of a WAN link  
failure.  
Non-SRST—Not configured for SRST.  
All—SRST and non-SRST.  
Protocol radio  
buttons  
Select one:  
SCCP—Phones using Skinny Client Control Protocol.  
SIP—Phones using Session Initiation Protocol.  
All—SCCP and SIP.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-6  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
GUI Element  
Description/Action  
IP Phone Type field Enter a comma-separated list of phone models. Edit the entries in the field  
directly or select from a list of phone types, as follows:  
1. Click  
. The Select IP Phone Types list appears.  
2. Select the desired IP phone types from the list. (Use the Control key or the  
Shift key to select more than one IP phone type from the list.)  
3. Click OK.  
CCM/CCM Cluster/  
CME pane  
Exclude check box—Deselected by default. Select to exclude phones that  
belong to any Cisco Unified Communications Manager, Cisco Unified  
Communications Manager cluster, and Cisco Unified Communications  
Manager Express in the list box.  
List box—Enter a comma-separated list of Cisco Unified Communications  
Managers, Cisco Unified Communications Manager clusters, and  
instances of Cisco Unified Communications Manager Express, or select  
them as follows:  
1. Click  
appears.  
. The Select CCM/CCM Cluster/CME dialog box  
2. In the CCM/CCM Cluster/CME Selector, expand groups and select  
one or more of the following: Cisco Unified Communications  
Manager, Cisco Unified Communications Manager Cluster, and Cisco  
Unified Communications Manager Express.  
3. Click OK. The dialog box closes and the Find IP Phones screen  
displays your selections in the CCM/CCM Cluster/CME list box.  
Switch pane  
Exclude check box—Deselected by default. Select to exclude phones that  
are connected to any switch in the list box.  
List box—Enter a comma-separated list of switches, or select them as  
follows:  
1. Click  
appears.  
. The Inventory Analysis Switch Selection dialog box  
2. In the Switch Selector, expand groups and select switches.  
3. Click OK. The dialog box closes and the Find IP Phones screen  
displays your selection in the Switch list box.  
SRST Router pane  
Exclude check box—Deselected by default. Select to exclude phones that  
use any SRST router in the list box.  
List box—Enter a comma-separated list of routers, or select them as  
follows:  
1. Click  
appears.  
. The Inventory Analysis Router Selection dialog box  
2. In the Router Selector, expand groups and select routers.  
3. Click OK. The dialog box closes and the Find IP Phones screen  
displays your selection in the Router list box.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-7  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Step 3  
Click View. The Inventory Analysis Report appears in another window. See Understanding IP Phone  
You might not be able to see the list of Cisco Unified Communications Manager or switches in the popup  
window that appears when you click  
following:  
. This occurs when the PIFServer process is down. Do the  
Check the status of PIFServer by using the command pdshow PIFServer from the command line.  
If PIFServer is down, use the Common Services start function. To do this:  
1. From the Operations Manager home page, click CiscoWorks in the upper right-hand corner of  
the window. The CiscoWorks home page opens.  
2. Under Common Services, select Server > Admin > Processes. The Process Management page  
appears, displaying process names in a table.  
3. Locate the PIFServer process in the table, select the check box for it, and click Start.  
Note  
Alternatively, you can bring PIFServer up using the command pdexec PIFServer from the  
command line. Use this approach if, for example, the web server is down.  
Generating the All IP Phones/Lines Report  
Step 1  
Step 2  
Select Reports > Audio Phones and Applications > Audio Phones/Lines. The Audio Phones/Lines  
window appears.  
Select Audio Phones from the list, and click View. The Audio Phones/Lines report appears, displaying  
the information described in .  
Note  
You can also generate the All IP Phones/Lines from the Monitoring Dashboard tab by selecting Click to  
View All Phones in the IP Phone Outage Status pane.  
Generating the SRST IP Phones Report  
The SRST IP Phones report shows a list of phones that are configured for Survivable Remote Site  
Telephony (SRST).  
Step 1  
Select Reports > Audio Phones and Applications > SRST IP Phones. The SRST IP Phones report  
appears in a new window, displaying information for the SRST configuration only. For more  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-8  
 
   
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Generating the SIP Phones Report  
The SIP Phones report shows a list of SIP phones.  
Step 1  
Select Reports > Audio Phones and Applications > SIP Phones. The SIP Phones report appears in a  
new window, displaying information for SIP phones only. For more information, see Understanding IP  
Generating the IP Communicators Report  
Note  
IP Communicators are also included in the All IP Phones/Lines and the All CTI Applications reports and  
they can be included in the Inventory Analysis report.  
Step 1  
Select Reports > Audio Phones and Applications > IP Communicators. The IP Communicators  
report appears in a new window, displaying information for IP Communicators only. For more  
Generating the All CTI Applications Report  
The All CTI Applications report lists Computer Telephony Interface (CTI) device applications registered  
with the Cisco Unified Communications Manager that Operations Manager monitors. The following  
applications are registered to the Cisco Unified Communications Manager as CTI devices or CTI ports:  
Cisco IP Communicators  
Cisco Personal Assistant  
Cisco Customer Response Applications  
Cisco IP Contact Center  
Cisco Emergency Responder  
Step 1  
Select Reports > Audio Phones and Applications > All CTI Applications. The All CTI Applications  
Report appears, displaying the information described in the following table.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-9  
 
     
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Table 13-2  
All CTI Applications Report  
Description  
Column  
Extension  
Extension of the CTI Application (CTI Port/CTI Route Point).  
Application  
Information  
The defined name of the CTI application, as reported by the Cisco Unified  
Communications Manager. If the application is not registered in CTI, this  
field displays Not supported.  
Registered  
IP Address  
Whether or not the CTI Application is registered with the Cisco Unified  
Communications Manager: Yes or No.  
IP address of the CTI application (in case the application is a CTI port)  
IP address of the Cisco Unified Communications Manager (in case the  
application is a CTI Route Point)  
CCM Address  
Device Type  
Cisco Unified Communications Manager address.  
Type of the device.  
Device Description Description of the device.  
Generating the All ATA Devices Report  
The All ATA Devices report lists all Advanced Technology Attachment (ATA) devices registered with  
the Cisco Unified Communications Manager that Operations Manager monitors.  
Step 1  
Select Reports > Audio Phones and Applications > All ATA Devices. The All ATA Devices report  
appears in a new window, displaying information for all ATA devices only. For more information, see  
Table 13-3  
All ATA Devices Report  
Columns and Buttons Description/Action  
Device Name  
Device Type  
CCM Name  
Name of the ATA device  
ATA device type  
Name of the Cisco Unified Communications Manager  
Generating the Cisco 1040 Sensors Report  
The Cisco 1040 Sensors report lists all Cisco 1040 Sensors connected to the switches that Operations  
Manager monitors.  
Step 1  
Select Reports > Audio Phones and Applications > Cisco 1040 Sensors. The Cisco 1040 Sensors  
report appears in a new window, displaying information for Cisco 1040 Sensors only.For more  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-10  
 
   
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Table 13-4  
Cisco 1040 Sensors Report  
Columns and Buttons Description/Action  
Device ID  
Device ID of the 1040 Sensor.  
IP address of the 1040 Sensor.  
IP Address  
Switch Name  
Switch Address  
Switch Port  
Name of the switch to which the 1040 Sensor is connected.  
IP address of the switch to which 1040 Sensor is connected.  
Switch port to which 1040 Sensor is connected.  
Understanding the Associated Phone and Phone Detail Reports  
You can launch these reports from the Service Level View, the Alert Details page, or the Detailed Device  
View. Depending on the device that you have selected, the report will list one of the following:  
Phones that are connected to the switch.  
Phones that are registered to Cisco Unified Communications Manager or Cisco Unified  
Communications Manager Express.  
The report contains the data listed in Table 13-5. For information on how phone counts are displayed in  
Device Management Summary window, see How Are Phone Counts Displayed in Views and Reports?,  
page 1-19.  
Understanding IP Phone Inventory Reports  
Table 13-5 describes the data displayed in the following reports:  
Inventory Analysis—Includes phones that match criteria that you specify.  
All IP Phones/Lines—Includes all IP phones, including IP Communicators and IP phones that are  
configured for SRST.  
Note  
You can filter the All IP Phones/Lines report to include only the phones that you want to see.  
SRST IP Phones—Includes only phones that are configured for SRST.  
SIP Phones—Includes only phones that use Session Initiation Protocol (SIP).  
IP Communicators—Includes IP Communicators only.  
Associated Phones and Phone Details—Includes only phones associated with a selected device; for  
example, phones connected to a switch or phones registered to Cisco Unified Communications  
Manager (or Cisco Unified Communications Manager Express).  
By default, these reports display only these columns: Extension, User, IP Address, MAC Address,  
Model, Regd, CCM, Switch Address, and Port. You can hide these columns and select among additional  
Table 13-5 describes all possible columns of data that can appear on these reports. For information on  
how phone counts are displayed in Operations Manager windows, see How Are Phone Counts Displayed  
in Views and Reports?, page 1-19.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-11  
 
   
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Table 13-5  
IP Phone Reports  
Columns and Buttons  
Number  
Description/Action  
The row number; starting from 1.  
Check box  
Select any phones that you would like to:  
Print—Include selected phones in a new window in print-friendly  
Export to a file—Include selected phones in a PDF or CSV file. (See  
Launch a test on—Include selected phones in tests that you create  
from the Launch button when it is present at the bottom of the report.  
Extn.  
Extension number of the IP phone; for example, 4000. Click the hyperlink  
to see more details of the IP phone (see Opening an IP Phone Web  
User  
Username obtained using LDAP if you have configured an LDAP server  
in Operations Manager. See Configuring LDAP, page 16-43 and Obtaining  
IP Address  
MAC Address  
IP address of the IP phone; for example, 10.76.38.65. Click the hyperlink  
to see more details of the IP phone (see Opening an IP Phone Web  
MAC address of the IP phone; for example, 003094c40454, or  
00-30-94-c4-04-54. Click the hyperlink to see more details of the IP phone  
Model  
Model number of the IP phone; for example, 7902, 7905, 7910, 7912,  
7920, 7935, 7940, 7960, or 7970.  
Protocol  
Protocol the phone is using to communicate with Cisco Unified  
Communications Manager or Cisco Unified Communications Manager  
Express.  
Note  
Only SCCP and SIP phones will be discovered. H.323 and MGCP  
protocols are not currently supported.  
Regd.  
CCM  
Registration status of the IP phone with respect to Cisco Unified  
Communications Manager or Cisco Unified Communications Manager  
Express. Displays yes if the IP phone is registered or no if the IP phone is  
not registered.  
One of the following:  
CCM—Cisco Unified Communications Manager  
CCE—Cisco Unified Communications Manager Express  
CCM/CME Name  
CCM/CME Address  
DNS name of the Cisco Unified Communications Manager or Cisco  
Unified Communications Manager Express with which the IP phone is  
registered.  
IP address of the Cisco Unified Communications Manager or Cisco  
Unified Communications Manager Express with which the IP phone is  
registered.  
Switch Name  
Name of the switch to which the IP phone is connected.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-12  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Table 13-5  
IP Phone Reports (continued)  
Columns and Buttons  
Switch Address  
Port  
Description/Action  
IP address of the switch to which the IP phone is connected.  
Switch port used by the IP phone; for example, Fa0/12.  
Status of the port used by the IP phone: up or down.  
Name of the VLAN (user-defined name); for example, voice.  
ID of the VLAN for the IP phone; for example, 100.  
One of the following:  
Port Status  
VLAN Name  
VLAN ID  
SRST Mode  
yes—The phone is in SRST mode  
no—The phone is not in SRST mode  
?—The phone is suspected to be in SRST mode  
—(dash)—The phone is not an SRST phone  
SRST Router  
One of the following:  
IP address of the router that the phone is using for SRST  
—(dash)  
Serial No.  
IP phone serial number  
Note This information is obtained by phone polling. See Understanding  
Identifier of the firmware running on the phone  
Application ID  
Load ID  
Note  
This information is obtained by phone polling. See Understanding  
Identifier of the factory-installed load running on the phone  
Note  
This information is obtained by phone polling. See Understanding  
Launch button  
Click and select a menu item to configure tests for the IP phones selected  
on this report.  
For more information, see the following topic:  
Phones Report Tool Buttons  
The following report tool buttons might appear in the upper-right corner of Audio Phones and  
Applications or Video Phone reports.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-13  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Table 13-6  
Phone Report Tool Buttons  
Opens a filter dialog box for refining the report. See Filtering Audio Phones and  
Exports the current report to a PDF or CSV file to save on your local system.  
Note  
Enables you to export data for all phones, selected phones, or a range of record  
numbers.  
Opens a new window with the report formatted for printing from your browser.  
Opens a column selector dialog box from which you can select those columns of a report to  
Opens context-sensitive help.  
Filtering Audio Phones and Applications Reports  
From an Audio Phones and Applications report, click the Filter button  
when present. A filter  
dialog box opens.  
Note  
Filtering is performed using:  
An implicit “or” within each field—If you enter more than one value in a field, phones that match  
any value are included in the report.  
An implicit “and” for all fields—If you enter values in more than one field, phones that match at  
least one value from each field are included in the report after filtering.  
For example, if you enter two phone models, such as 7910 and 7935, in the IP Phone Model field, the  
report that results includes all phones of these models. If, in addition, you enter a VLAN ID and a switch,  
the report is filtered to include only phones of the models specified that are connected to the switch and  
in the VLAN that you selected.  
Step 1  
Enter values in one or more fields, described in the following table.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-14  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
GUI Element  
Description/Action  
From left to right:  
Find IP Phones  
where list boxes and  
field  
Select one of the following:  
Extension number  
IP Address  
MAC Address  
Select one of the following:  
is exactly  
begins with  
contains  
ends with  
Enter a value.  
VLAN Name field  
VLAN ID field  
Enter the name of the VLAN.  
Enter the VLAN ID.  
Select one:  
IP Phone Outage  
Status radio buttons  
Registered  
Unregistered  
All—Registered and unregistered phones.  
SRST radio buttons Select one:  
SRST—Configured to fail over to an SRST router in case of a WAN link  
failure.  
Non-SRST—Not configured for SRST.  
All—SRST and non-SRST.  
IP Phone Type field Enter a comma-separated list of phone models. By default, all supported phone  
models are included in this field, including IP Communicator. Edit the entries  
in the field directly or select from a list of phone models, as follows:  
1. Click  
. The Select IP Phone Types list appears.  
2. Select the desired IP phone types from the list. (Use the Control key or the  
Shift key to select more than one IP phone type from the list.)  
3. Click OK.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-15  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
GUI Element  
Description/Action  
CCM/CME pane  
Exclude check box—Deselected by default. Select to exclude phones that  
belong to any Cisco Unified Communications Manager, Cisco Unified  
Communications Manager cluster, and Cisco Unified Communications  
Manager Express in the list box.  
List box—Enter a comma-separated list of Cisco Unified Communications  
Managers, Cisco Unified Communications Manager clusters, and  
instances of Cisco Unified Communications Manager Express, or select  
them as follows:  
1. Click  
appears.  
. The Select CCM/CCM Cluster/CME dialog box  
2. In the CCM/CCM Cluster/CME Selector, expand groups and select  
one or more instances of the following: Cisco Unified  
Communications Manager, Cisco Unified Communications Manager  
cluster, and Cisco Unified Communications Manager Express.  
3. Click OK. The dialog box closes and the Find IP Phones screen  
displays your selections in the CCM/CCM Cluster/CME list box.  
Switch pane  
Exclude check box—Deselected by default. Select to exclude phones that  
are connected to any switch in the list box.  
List box—Enter a comma-separated list of switches, or select them as  
follows:  
1. Click  
appears.  
. The Inventory Analysis Switch Selection dialog box  
2. In the Switch Selector, expand groups and select switches.  
3. Click OK. The dialog box closes and the Find IP Phones screen  
displays your selection in the Switch list box.  
SRST Router pane  
Exclude check box—Deselected by default. Select to exclude phones that  
use any SRST router in the list box.  
List box—Enter a comma-separated list of switches, or select them as  
follows:  
1. Click  
appears.  
. The Inventory Analysis Router Selection dialog box  
2. In the Router Selector, expand groups and select routers.  
3. Click OK. The dialog box closes and the Find IP Phones screen  
displays your selection in the Router list box.  
Step 2  
Click OK. The filter dialog box closes and the IP phone report refreshes. For more information, see  
You might not be able to see the list of Cisco Unified Communications Manager or switches in the popup  
window that appears when you click  
following:  
. This occurs when the PIFServer process is down. Do the  
Check the status of PIFServer by using the command pdshow PIFServer from the command line.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-16  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
If PIFServer is down, use the Common Services start function. To do this:  
1. From the Operations Manager home page, click CiscoWorks in the upper right-hand corner of  
the window. The CiscoWorks home page opens.  
2. Under Common Services, select Server > Admin > Processes. The Process Management page  
appears, displaying process names in a table.  
3. Locate the PIFserver process in the table, select the check box for it, and click Start.  
Note  
Alternatively, you can bring PIFServer up using the command pdexec PIFServer from the  
command line. Use this approach if, for example, the web server is down.  
Selecting Columns to Display and to Hide on a Phone Inventory Report  
By default, phone reports display these columns of data:  
Extension  
User  
IP Address  
MAC Address  
Model  
Regd  
CCM  
Switch Address  
Port  
For definitions, see Understanding IP Phone Inventory Reports, page 13-11. Use this procedure to hide  
any of the default columns and select among additional columns of data to display.  
Step 1  
Step 2  
In the upper-right corner of a phone report, click the Tools button  
appears.  
. A column selector dialog box  
To hide a column, place it on the Hidden Column(s) list:  
a. Select the column by name from the Displayed Column(s) list.  
b. Click the < Remove << button. The column name appears on the Hidden Column(s) list.  
Note  
To select adjacent columns, hold down the Shift key. To select columns that are not adjacent,  
hold down the Ctrl key.  
Step 3  
Step 4  
To display a column, place it on the Displayed Column(s) list:  
a. Select the column by name from the Hidden Column(s) list.  
b. Click the < Add << button. The column name appears on the Displayed Column(s) list.  
Click Update. The report window refreshes, displaying only columns from the Displayed Column(s)  
list.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-17  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Note  
Your selections do not affect other users and will remain in effect for this report until you log out of  
Operations Manager or until you change your selections.  
Opening an IP Phone Web Interface  
You can open an IP phone web interface from an Audio Phones and Applications report or a Video  
Phones report by clicking one of these hyperlinks when available:  
Extension number  
IP address  
MAC address  
Another window opens with information directly from the phone, including network configuration  
details, device, port, and Ethernet information for the specified IP phone.  
Obtaining Usernames from LDAP for IP Phone Reports  
Operations Manager can supply usernames on audio phone and video phone reports from a corporate  
LDAP server when the LDAP server is:  
Configured with information for all users.  
Not a secure LDAP server (does not use SSL authentication).  
Added to Operations Manager with the correct credentials and appropriate telephone number. The  
telephone number can be a phone number or a phone MAC address, depending on the LDAP  
configuration.  
Usernames are updated in Operations Manager when IP phone discovery runs. IP phone discovery  
obtains users in the corporate directory that have the telephoneNumber attribute, and correlates data for  
them with information in Cisco Unified Communications Manager.  
For more information, see the following topics:  
Launching Tests for Selected Audio Phones  
When the Launch button is present at the bottom right-hand corner of an Audio Phones and Applications  
report or Video Phones report, you can select phones from the report, and configure tests on them using  
one of the available options:  
SRST Test—Select one or more phones. See Configuring a Single SRST Test as Needed, page 18-9.  
Phone Test—Select one or more phones. See Creating and Running a Phone Test on Demand,  
page 10-13.  
Synthetic Test—Select one phone only. See Creating Synthetic Tests, page 9-6.  
Phone Status Tests—Select one or more phones. See Adding a Phone Status Test—Using the Create  
Phone Status Test Page, page 8-4.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-18  
 
     
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Troubleshooting Tips for Audio Phones and Applications Reports and Video Phones Reports  
This section includes the following tips:  
N/A or Not Available Appears in Audio Phones and Applications Reports and Video Phone Reports  
If N/A or Not Available appears instead of data in a field, it means one of the following:  
The switch or the Cisco Unified Communications Manager is not monitored by Operations Manager.  
To correct this condition, add the switch or Cisco Unified Communications Manager to Operations  
Manager.  
Operations Manager cannot get the information from the switch or the Cisco Unified  
Communications Manager. To correct this condition, check the status of the switch or Cisco Unified  
Communications Manager in the Alerts and Events display. If the switch or Cisco Unified  
Communications Manager is unreachable, ensure that the connectivity is restored.  
For Audio Phones and Applications reports, if the phone is a Cisco Wireless IP Phone 7920, only  
logical information from Cisco Unified Communications Manager is displayed. Switch information  
is not available.  
Cisco Wireless IP Phone 7920 Not Displayed in Audio Phones and Applications Reports  
For the Cisco Wireless IP Phone 7920 to be monitored in Operations Manager, its Aironet access point  
must also be monitored by Operations Manager. Only logical information from the Cisco Unified  
Communications Manager is displayed for this phone; switch information for the 7920 appears as N/A  
or Not Available.  
In Cisco Unified Communications Manager releases prior to 4.0, the 7920 appears as a 7960. Therefore,  
Operations Manager also displays the 7920 as a 7960 for Cisco Unified Communications Manager  
releases prior to 4.0.  
Note  
IP Phone Outage Status reports, such as IP Phone Audit and Suspect Phone reports, are not  
supported for the Cisco Wireless IP Phone 7920.  
Phones Missing from Audio Phones and Applications Reports  
If a report does not contain information about an IP phone, the phone might be one of the following:  
A synthetic phone—IP phones configured for synthetic tests (synthetic phones) do not appear in  
Audio Phones and Applications reports.  
An IP Communicator—Generate the IP Communicator Report. See Generating the IP  
A CTI application—These phones appear on the All CTI Applications report. See Generating the  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-19  
 
       
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Using IP Phone Outage Status Changes Reports  
IP Phone Outage Status reports supply information for phones that have undergone a status change  
during the previous 1 to 30 days.  
The IP Phone Audit report provides a summary of all of these changes (see Using the IP Phone Audit  
Report, page 13-22). Additional IP Phone Outage Status reports focus on particular types of changes, as  
shown in the following table.  
Phone Status Change  
Details in this Report…  
Connection—Connected to a  
different switch or switch port  
Extension number change  
Registration with Cisco Unified  
Communications Manager:  
Registered to a different Cisco  
Unified Communications  
Manager  
Not registered  
Attempted to register and failed  
Removed  
Understanding the Time Period Covered by Phone Status Changes Reports  
When you generate an IP Phone Outage Status or Video Phone Status Changes report, your results can  
be affected by the time zones in which each of following resides:  
Your client system—Operations Manager calculates the time period (previous 24 hours through  
previous 7 to 30 days, depending on the report) for Phone Status Changes reports based on the date  
and time on your client system.  
Operations Manager system—Operations Manager records some audits, such as extension number  
changes, based on the time that the change is detected on the Operations Manager system.  
Cisco Unified Communications Manager—Operations Manager records some audits, such as phone  
moves, based on the time on Cisco Unified Communications Manager that changes were detected.  
If any of these systems is not in the same time zone as your system, you must take the time zone  
difference into account when you generate and view Phone Status Changes reports.  
Tip  
If the audit date and time on the Operations Manager system is inconsistent with those shown in the IP  
Phone Outage Status or Video Phone Status Changes report, make sure that all Cisco Unified  
Communications Managers in the network are set to synchronize.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-20  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Tracking Phone Outage Status when a Cisco Unified Communications Manager Is Down  
If a Cisco Unified Communications Manager that is configured with a backup goes down, audio phones  
and video phones fail over to the backup Cisco Unified Communications Manager. Operations Manager  
stores audit records for the phones that register with the backup and these status changes are included in  
IP Phone Outage Status and Video Phone Status Changes reports.  
Operations Manager does not store audit records in the following cases:  
An entire Cisco Unified Communications Manager cluster goes down.  
A Cisco Unified Communications Manager for which a backup is not configured goes down.  
Therefore, status changes for the phones registered to Cisco Unified Communications Managers in these  
situations are not included in IP Phone Outage Status and Video Phone Status Changes reports.  
Note  
During the time that Cisco Unified Communications Manager is down, affected phones are listed on the  
IP Phone Outage Status Monitoring Dashboard where they remain for a minimum of 24 hours. See  
Getting Phone Alert Details, page 5-4.  
Using the IP Phone Move Report  
The IP Phone Move report displays IP phones that have moved, including details about the phone before  
and after the move. The IP Phone Move report shows the time at which the IP phone move was detected,  
and not the time at which the move occurred.  
Information for the IP Phone Move report is gathered every 5 minutes by IP Phone Movement Tracking  
(see Understanding IP Phone Movement Tracking, page 13-28). IP Phone Movement Tracking checks  
all the switches and Cisco Unified Communications Managers, identifies the list of changes, and  
generates the data on IP phone moves.  
Note  
You obtain fresh data for the IP Phone Move report about once every 5 minutes. Close the report and  
regenerate it to refresh the data.  
Step 1  
Step 2  
Select Reports > Audio Phones and Applications > IP Phone Status Changes > IP Phone Move. The  
IP Phone Status reports page appears.  
Select the time period (24 hours - 30 days) from the list and click View. The IP Phone Move report  
appears, displaying the information described in the following table.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-21  
 
   
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Column  
Description  
Extension  
Extension number of the IP phone. The Extension column has two  
subcolumns—Old and New:  
Old—Extension number of the IP phone before it was moved.  
New—Extension number of the IP phone after it was moved.  
IP Address  
IP address of the IP phone.  
MAC Address  
CCM Address  
MAC address of the IP phone.  
Cisco Unified Communications Manager address. The CCM Address column  
has two subcolumns:  
Old—CCM address of the IP phone before it was moved.  
New—CCM address of the IP phone after it was moved.  
Switch Address  
Switch Port  
IP address of the switch to which the IP phone is connected. The Switch  
Address column has two subcolumns:  
Old—Switch address used by the IP phone before it was moved.  
New—Switch address used by the IP phone after it was moved.  
Switch port used by the IP phone. The Switch Port column has two  
subcolumns:  
Old—Switch port used by the IP phone before it was moved.  
New—Switch port used by the IP phone after it was moved.  
Time Stamp  
Reflects the date and time that Operations Manager detected the IP phone  
move.  
Tip  
Phones that have moved and do not run Cisco Discovery Protocol (CDP) do not appear in this report. For  
example, 30VIP and 12SP+ do not run CDP; you will not see move entries for them.  
Using the IP Phone Audit Report  
The IP Phone Audit report shows the changes that have occurred in the managed IP phone network. For  
example, this report shows you the IP phones that have been added to or deleted from your network, or  
IP phone Outage status. Phone status changes occur, for instance, when a phone becomes unregistered  
with the Cisco Unified Communications Manager.  
You can see what has changed within the last 30 days. Audits are maintained in the database for a period  
of 30 days, after which they are purged.  
Information for the IP Phone Audit report is gathered by IP Phone Movement Tracking (see  
Understanding IP Phone Movement Tracking, page 13-28). IP Phone Movement Tracking runs every 5  
minutes, so you can run the IP Phone Audit report and obtain fresh data about once every 5 minutes. This  
interval is not configurable.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-22  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Step 1  
Step 2  
Select Reports > Audio Phones and Applications > IP Phone Outage Status > IP Phone Audit. The  
IP Phone Status reports page appears.  
Select the time period (24 hours - 30 days) from the list and click View. The IP Phone Audit report  
appears, displaying the information described in the following table.  
Column  
Description  
Extension  
IP Address  
MAC Address  
Extension number of the IP phone.  
IP address of the IP phone.  
MAC address of the IP phone.  
CCM/CME Address Cisco Unified Communications Manager or Cisco Unified Communications  
Manager Express address.  
Switch Address  
Switch Port  
Time  
IP address of the switch to which the IP phone is connected.  
Switch port used by the IP phone.  
Time of audit on the Cisco Unified Communications Manager.  
Note  
Audit date and time are taken directly from Cisco Unified  
Communications Manager without adjustment for time zone  
differences, if any exist, between Cisco Unified Communications  
Manager and Operations Manager systems.  
Audit Type  
One of the following:  
add—Phone added to the network.  
remove—Phone removed from the network.  
unregistered—From Cisco Unified Communications Manager.  
registered—With Cisco Unified Communications Manager.  
Note  
The IP Phone Audit report is not supported for Cisco Wireless IP Phone 7920.  
Using the Removed IP Phones Report  
The Removed IP Phones report lists phones that have been removed during the previous 1 to 30 days.  
Operations Manager gathers the information used in this report every 5 minutes (see Understanding IP  
Phone Movement Tracking, page 13-28.) Therefore, you can run this report and obtain fresh data about  
once every 5 minutes.  
Step 1  
Step 2  
Select Reports > Audio Phones and Applications > IP Phone Status Changes > Removed IP  
Phones. The IP Phone Status reports page appears.  
Select the time period (24 hours - 30 days) from the list and click View. The Removed IP Phones report  
appears in a new window, displaying the information described in the following table.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-23  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Column  
Description  
Extension  
IP Address  
MAC Address  
Extension number of the IP phone.  
IP address of the IP phone.  
MAC address of the IP phone.  
CCM/CME Address Cisco Unified Communications Manager or Cisco Unified Communications  
Manager Express address.  
Switch Address  
Switch Port  
Time  
IP address of the switch to which the IP phone was previously connected.  
Switch port to which the IP phone was previously connected.  
Time that the phone was removed from Cisco Unified Communications  
Manager.  
Note  
Removal date and time are taken directly from Cisco Unified  
Communications Manager without adjustment for time zone  
differences, if any exist, between Cisco Unified Communications  
Manager and Operations Manager systems.  
Indication  
Indicates the Cisco Unified Communications Manager registration status of the  
IP phone: removed.  
Note  
The Removed IP Phone report is not supported for Cisco Wireless IP Phone 7920.  
Using the Extension Number Changes Report  
The Extension Number Changes report lists phones that have changed extension numbers during the  
previous 1 to 30 days. Operations Manager gathers the information used in this report every 5 minutes  
(see Understanding IP Phone Movement Tracking, page 13-28.) Therefore, you can run this report and  
obtain fresh data about once every 5 minutes.  
Step 1  
Step 2  
Select Reports > Audio Phones and Applications > IP Phone Status Changes > Extension Number  
Changes. The IP Phone Status reports page appears.  
Select the time period (24 hours - 30 days) from the list and click View. The Extension Number Changes  
report appears in a new window, displaying the information described in the following table.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-24  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Column  
Description  
Extension  
Extension number of the IP phone.  
IP address of the IP phone.  
IP Address  
MAC Address  
CCM Address  
Switch Address  
Switch Port  
Time  
MAC address of the IP phone.  
Cisco Unified Communications Manager address.  
IP address of the switch to which the IP phone was previously connected.  
Switch port to which the IP phone was previously connected.  
Time that Operations Manager determined that the extension number changed.  
Note  
The Extension Number Changes report is not supported for Cisco Wireless IP Phone 7920.  
Using the Suspect Phone Report  
The Suspect Phone report displays the attributes of all IP phones in your network that:  
Have not registered with a Cisco Unified Communications Manager.  
Have made an unsuccessful attempt to register with a Cisco Unified Communications Manager.  
Step 1  
Step 2  
Select Reports > Audio Phones and Applications > IP Phone Status Changes > Suspect. The IP  
Phone Status reports page appears.  
Select the time period (24 hours - 30 days) from the list and click View. If there are any suspect IP  
phones, the Suspect Phone report appears in a new window, displaying the information described in the  
following table.  
Column  
Description  
Extension  
IP Address  
MAC Address  
Extension number of the suspect IP phone.  
IP address of the suspect IP phone.  
MAC address of the suspect IP phone.  
Switch Address IP address of the switch to which the suspect IP phone is connected.  
Switch Port  
Indication  
Switch port used by the suspect IP phone.  
Indicates the Cisco Unified Communications Manager registration status of the IP  
phone.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-25  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Tip  
Some IP phones appear marked as Suspect when they are not. To correct this, make sure that the Cisco  
Unified Communications Manager is managed by Operations Manager. You can check the status of the  
Cisco Unified Communications Manager on the Device Details report; see Viewing Device Details,  
page 16-34.  
If the Cisco Unified Communications Manager is not managed by Operations Manager, add it to  
Operations Manager.  
If the Cisco Unified Communications Manager is managed by Operations Manager but is not  
reachable, the cause may be loss of connectivity with Operations Manager. Make sure that  
connectivity with Operations Manager is restored.  
Note  
The Suspect Phone report is not supported for Cisco Wireless IP Phone 7920.  
Using the Duplicate MAC/IP Address Report  
The Duplicate MAC/IP Address report lists the attributes of all IP phones in your network that have:  
Duplicate MAC addresses; that is, a phone that has the same MAC address as another phone but a  
different IP address.  
Duplicate IP addresses; that is, a phone that has the same IP address as another phone but a different  
MAC address.  
Operations Manager does not show a multihomed host as a phone with a duplicate MAC address.  
Note  
For the Duplicate MAC/IP Address report to display the correct information, the switch to which the  
phone is connected must be monitored by Operations Manager. If the switch is not monitored by  
Operations Manager, the report will not display any information.  
Step 1  
Step 2  
Select Reports > Audio Phones and Applications > IP Phone Status Changes > Duplicate MAC/IP  
Address. The IP Phone Status reports page appears.  
Select the time period (24 hours - 30 days) from the list and click View. The Duplicate MAC/IP Address  
IP Phone report appears, displaying the information described in the following table.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-26  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Audio Phones and Applications Reports  
Column  
Description  
Extension  
IP Address  
Extension number of the duplicate IP phone.  
One of the following:  
If the problem is a shared MAC address, the IP address of the duplicate IP  
phone  
If the problem is a shared IP address, the IP address in question  
MAC Address  
One of the following:  
If the problem is a shared IP address, the MAC address of the duplicate IP  
phone  
If the problem is a shared MAC address, the MAC address in question  
Switch Address IP address of the switch to which the duplicate IP phone is connected.  
Switch Port  
Indication  
Switch port used by the duplicate IP phone.  
Indicates the Cisco Unified Communications Manager registration status of the IP  
phone: duplicate ip.  
Exporting IP Phone Outage Status Reports  
Use this procedure to enable Operations Manager to generate IP Phone Outage Status reports once every  
24 hours and store them on the Operations Manager system in comma-separated values (CSV) and PDF  
formats. The creation date and time are used to name the report files. The filename format is  
typeofreport_date_time.filetype.  
Note  
Operations Manager does not automatically purge these report files. You must remove them manually.  
Step 1  
Select Reports > Audio Phones and Applications > IP Phone Status Changes > Export. The  
automatically Export 24-Hour IP Phone Status reports page appears, displaying the information  
described in the following table.  
GUI Element  
Description/Action  
Reports pane  
For each IP Phone Outage Status report that you want to generate and save  
nightly, select at least one of the following:  
CSV check box—Save the report in CSV format.  
PDF check box—Save the report in PDF format.  
Generate pane  
Save at—A default location for storing the reports on the Operations  
Manager server is displayed; you can enter another location on the server.  
E-mail to—(Optional) Enter a complete e-mail address.  
Step 2  
Click Apply.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-27  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Understanding IP Phone Movement Tracking  
Understanding IP Phone Movement Tracking  
Operations Manager gathers information from switches and Cisco Unified Communications Managers  
every 5 minutes to identify these types of IP phone moves:  
Intercluster—A phone that was previously registered with one Cisco Unified Communications  
Manager cluster is now registered with a different cluster.  
Physical—A phone that was physically connected to one switch port is now physically connected to  
a different switch port.  
Operations Manager gathers this information only for phones that run Cisco Discovery Protocol (CDP),  
such as Cisco Unified IP Phone. For supported models, see the Supported and Interoperable Devices and  
Software Table for Cisco Unified Operations Manager. Operations Manager stores this information for  
a period of 30 days, after which it is purged from the database. (For information about the daily purging  
schedule, see Setting System-Wide Parameters Using System Preferences, page 20-10.)  
Each time IP Phone Movement Tracking runs, fresh information becomes available for the following  
reports:  
IP Phone Audit  
IP Phone Move  
Removed IP Phones  
Video Phone Audit  
Video Phone Move  
Removed Video Phones  
Understanding Phone Polling  
The following information appears in phone reports and is gathered by Operations Manager directly  
from IP phones, daily beginning at 4 a.m:  
Serial Number—IP phone serial number  
Application Load ID—Identifier of the firmware running on the phone  
Load ID—Identifier of the factory-installed load running on the phone  
Using Video Phones Reports  
Note  
If you do not have the required software license, you will not be able to use Video Phones reports.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-28  
 
     
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
Video Phones reports provide two types of reports: inventory and video phone status change:  
Inventory reports—Provide detailed video phone data, reflecting the current status of video phones  
in your network. These reports enable you to search for a few video phones, list a specific set of  
video phones—such as phones connected to a switch or phones in SRST mode—or view all video  
phones and lines:  
Search—Use Search to view information for a few video phones or a single video phone; search  
enables you to find phones using all or part of an extension number, IP address, or MAC address.  
Inventory Analysis—Use the Inventory Analysis report to display video phones that meet  
criteria that you specify; for example, video phones that are registered to a particular Cisco  
Unified Communications Manager or video phones that are not connected to particular  
Video Phones/Lines—Use the Video Phones/Lines report to view data for all video phones that  
Operations Manager is monitoring. See Understanding the All Video Phones/Lines Report,  
TelePresence—Use the TelePresence report to view data for all TelePresence video phone  
devices and the Cisco Unified IP Phone 7970 associated with the corresponding TelePresence.  
SRST Video Phones—Use the SRST Video Phones report to view data for video phones that  
are configured for Survivable Remote Site Telephony (SRST) only. See Generating the SRST  
Note  
Video phones that are configured for SRST are also included in the All Video  
Phones/Lines report and can be included in the Inventory Analysis report.  
SIP Video Phones—Use the SIP Video Phones report to view data for all SIP video phones that  
Operations Manager is monitoring. See Generating the SRST Video Phones Report, page 13-38.  
When a web interface is accessible for a video phone, you can open it from most video phone reports  
by clicking the hyperlink for one of the following:  
Extension number  
MAC address  
Video phone IP address  
For more information, see Opening an IP Phone Web Interface, page 13-18.  
Video Phone Status Changes reports—Provide data for video phones that have undergone a status  
change during the previous 1 to 30 days:  
Video Phone Move—Use the Video Phone Move report to view data for phones that have been  
connected to a different switch or switch port or that have registered to a different Cisco Unified  
Communications Manager. See Using the Video Phone Move Report, page 13-43.  
Video Phone Audit—Use the Video Phone Audit report to obtain a summary of changes,  
including data for phones that have moved, been removed, undergone an extension number  
change, appeared in inventory with a duplicate MAC or IP address, or become suspect. See  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-29  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
For more information, see:  
Generating Video Phone Inventory Reports  
This topic includes the following:  
Searching for Video Phones  
Use Search to find one or only a few video phones in your network. Search displays information for one  
phone at a time; you can page back and forth to view information for each phone when multiple phones  
are found. You can search for phones using all or part of an extension number, IP address, or MAC  
address.  
When you want to find many phones—for example, all video phones registered with a Cisco Unified  
Communications Manager or all video phones connected to a switch—use the Inventory Analysis report;  
Step 1  
Step 2  
Select Reports > Video Phones > Search. The Find Video Phones page appears.  
In the Find Video Phones Where pane:  
a. Select one of the following:  
Extension number  
IP address  
MAC address  
b. Then select one of the following:  
is exactly  
begins with  
contains  
ends with  
c. Enter a value.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-30  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
Step 3  
Click View. The Video Phone Details dialog box appears, displaying the information described in the  
following table.  
Table 13-7  
Video Phone Details  
Row  
Description  
Extension  
Extension number of the video phone; for example, 4000. Click the hyperlink to open the web interface  
IP Address  
IP address of the video phone; for example, 10.76.38.65. Click the hyperlink to see more details of the  
MAC Address  
CCM Address  
MAC address of the video phone; for example, 003094c40454, or 00-30-94-c4-04-54. Click the  
hyperlink to open the web interface on the video phone (see Opening an IP Phone Web Interface,  
Address of the Cisco Unified Communications Manager (CCM) with which the video phone is  
registered; for example, 10.76.38.70.  
Switch Address  
Switch Name  
Switch Port  
IP address of the switch to which the video phone is connected; for example, 10.76.29.162.  
Switch to which the video phone is connected.  
Switch port to which the video phone is connected; for example, Fa0/12.  
Status of the switch port to which the video phone is connected: up or down.  
Port Status  
Video Phone Status Cisco Unified Communications Manager registration status of the video phone:  
yes—The video phone is registered with a Cisco Unified Communications Manager.  
no—The video phone is not registered with a Cisco Unified Communications Manager.  
Video Phone Model Cisco video phone model number.  
Protocol  
Protocol the phone is using to communicate with Cisco Unified Communications Manager.  
Note  
Only SCCP and SIP phones will be discovered. H.323 and MGCP protocols are not currently  
supported.  
VLAN Name  
VLAN ID  
Name of the VLAN in the switch (a user-defined name); for example, voice.  
ID of the VLAN in the switch to which the video phone is connected; for example, 100.  
IP address of the router that the phone is using for SRST.  
Can be one of the following:  
SRST Router  
SRST Mode  
yes—The phone is in SRST mode  
no—The phone is not in SRST mode  
?—The phone is suspected to be in SRST mode  
–(dash)—The phone is not an SRST phone  
a. To display the information in print-friendly format in a new browser window, click Print; print the  
information, using the browser print function.  
b. If search results include more than one phone, view them by clicking Next or Prev.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-31  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
For more information, see the following topic:  
Generating the Video Phone Inventory Analysis Report  
Use Inventory Analysis to search for video phones in your network and display them in a report.  
Before You Begin  
Inventory Analysis searches for phones using:  
An implicit “or” within each field—If you enter more than one value in a field, Inventory Analysis  
searches for phones that match any value that you entered.  
An implicit “and” for all fields—If you enter values in more than one field, Inventory Analysis  
searches for phones that match at least one value from each field.  
For example, if you enter two video phone models in the Video Phone Model field, the Inventory  
Analysis report that results includes all phones of these models. If, in addition, you enter a VLAN ID  
and a switch, Inventory Analysis searches for phones that meet all these criteria; the report that results  
includes only phones of the models specified that are connected to the switch and in the VLAN that you  
selected.  
Step 1  
Step 2  
Select Reports > Video Phones > Inventory Analysis. The Find Video Phones page appears.  
Enter values in one or more fields, described in the following table.  
GUI Element  
Description/Action  
Find Video Phones  
Where list boxes and  
field  
From left to right:  
Select one of the following:  
Extension number  
IP Address  
MAC Address  
Then select one of the following:  
is exactly  
begins with  
contains  
ends with  
Enter a value.  
VLAN Name field  
VLAN ID field  
Enter the name of the VLAN.  
Enter the VLAN ID.  
Video Phone Status Select one:  
radio buttons  
Registered  
Unregistered  
All—Registered and unregistered phones.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-32  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
GUI Element  
Description/Action  
SRST radio buttons Select one:  
SRST—Configured to fail over to an SRST router in case of a WAN link  
failure.  
Non-SRST—Not configured for SRST.  
All—SRST and non-SRST.  
Protocol radio  
buttons  
Select one:  
SCCP—Phones using Skinny Client Control Protocol.  
SIP—Phones using Session Initiation Protocol.  
All—SCCP and SIP.  
Video Phone Type  
field  
Enter a comma-separated list of phone models. By default, all supported phone  
models are included in this field. Edit the entries in the field directly or select  
from a list of phone models, as follows:  
1. Click  
. The Select Video Phone Models list appears.  
2. Select the desired video phone models from the list. (Use the Control key  
or the Shift key to select more than one video phone model from the list.)  
3. Click OK.  
CCM/CCM Cluster/  
CME pane  
Exclude check box—Deselected by default. Select to exclude phones that  
belong to any Cisco Unified Communications Manager, Cisco Unified  
Communications Manager cluster, and Cisco Unified Communications  
Manager Express in the list box.  
List box—Enter a comma-separated list of Cisco Unified Communications  
Managers, Cisco Unified Communications Manager clusters, and instances  
of Cisco Unified Communications Manager Express, or select them as  
follows:  
1. Click  
appears.  
. The Select CCM/CCM Cluster/CME dialog box  
2. In the CCM/CCM Cluster/CME Selector, expand groups and select one  
or more of the following: Cisco Unified Communications Manager,  
Cisco Unified Communications Manager Cluster, and Cisco Unified  
Communications Manager Express.  
3. Click OK. The dialog box closes and the Find Video Phones screen  
displays your selections in the CCM/CCM Cluster/CME list box.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-33  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
GUI Element  
Description/Action  
Switch pane  
Exclude check box—Deselected by default. Select to exclude phones that  
are connected to any switch in the list box.  
List box—Enter a comma-separated list of switches, or select them as  
follows:  
1. Click  
appears.  
. The Inventory Analysis Switch Selection dialog box  
2. In the Switch Selector, expand groups and select switches.  
3. Click OK. The dialog box closes and the Find Video Phones screen  
displays your selection in the Switch list box.  
SRST Router pane  
Exclude check box—Deselected by default. Select to exclude phones that  
use any SRST router in the list box.  
List box—Enter a comma-separated list of routers, or select them as  
follows:  
1. Click  
appears.  
. The Inventory Analysis Router Selection dialog box  
2. In the Router Selector, expand groups and select routers.  
3. Click OK. The dialog box closes and the Find Video Phones screen  
displays your selection in the Router list box.  
Step 3  
Click View. The Inventory Analysis Report appears in another window. See Understanding Video Phone  
You might not be able to see the list of Cisco Unified Communications Managers or switches in the  
popup window that appears when you click  
Do the following:  
. This occurs when the PIFServer process is down.  
Check the status of PIFServer by using the command pdshow PIFServer from the command line.  
If PIFServer is down, use the Common Services start function. To do this:  
1. From the Operations Manager home page, click CiscoWorks in the upper right-hand corner of  
the window. The CiscoWorks home page opens.  
2. Under Common Services, select Server > Admin > Processes. The Process Management page  
appears, displaying process names in a table.  
3. Locate the PIFserver process in the table, select the check box for it, and click Start.  
Note  
Alternatively, you can bring PIFServer up using the command pdexec PIFServer from the  
command line. Use this approach if, for example, the web server is down.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-34  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
Generating the All Video Phones/Lines Report  
Step 1  
Step 2  
Select Reports > Video Phones > All Video Phones/Lines. The All IP Phones/Lines window appears.  
Select Video Phones from the list, and click View. The All Video Phones/Lines report appears,  
displaying the information described in Understanding Video Phone Reports, page 13-38.  
Note  
You can also generate the All Video Phones/Lines from the Monitoring Dashboard tab by selecting Click  
to View All Phones in the Video Phone Status pane.  
Understanding the All Video Phones/Lines Report  
The All Video Phones/Lines report lists video phones that match the criteria that you entered. By default,  
these reports display only these columns: Extension, User, IP Address, MAC Address, Model, Regd,  
CCM, Switch Address, and Port. You can hide these columns and select among additional columns to  
Table 13-8 describes all possible columns of data that can appear on the report.  
Table 13-8  
All Video Phones/Lines Report  
Columns and  
Buttons  
Description/Action  
Number  
The row number; starting from 1.  
Select phones that you would like to:  
Check box  
Print—Include selected phones in a new window in print-friendly format. (See  
Export to a file—Include selected phones in a PDF or CSV file. (See Phones Report  
Launch a test on—Include selected phones in tests that you create from the Launch  
button when it is present at the bottom of the report. (See Launching Tests for  
Extn.  
User  
Extension number of the video phone; for example, 4000. Click the hyperlink to see  
more details of the video phone (see Opening an IP Phone Web Interface, page 13-18).  
Username obtained using LDAP if you have configured an LDAP server in Operations  
Manager. See Configuring LDAP, page 16-43 and Obtaining Usernames from LDAP for  
IP Address IP address of the video phone; for example, 10.76.38.65. Click the hyperlink to see more  
details of the video phone (see Opening an IP Phone Web Interface, page 13-18).  
MAC  
Address  
MAC address of the video phone; for example, 003094c40454, or 00-30-94-c4-04-54.  
Click the hyperlink to see more details of the video phone (see Opening an IP Phone  
Model  
Model number of the video phone; for example, 7902, 7905, 7910, 7912, 7920, 7935,  
7940, 7960, or 7970.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-35  
 
     
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
Table 13-8  
All Video Phones/Lines Report  
Protocol  
Protocol the phone is using to communicate with Cisco Unified Communications  
Manager or Cisco Unified Communications Manager Express.  
Note  
Only SCCP and SIP phones will be discovered. H.323 and MGCP protocols are  
not currently supported.  
Regd.  
CCM  
Registration status of the video phone with respect to Cisco Unified Communications  
Manager or Cisco Unified Communications Manager Express. Displays yes if the video  
phone is registered or no if the video phone is not registered.  
One of the following:  
CCM—Cisco Unified Communications Manager  
CCE—Cisco Unified Communications Manager Express  
CCM/CME DNS name of the Cisco Unified Communications Manager or Cisco Unified  
Name Communications Manager Express with which the video phone is registered.  
CCM/CME IP address of the Cisco Unified Communications Manager or Cisco Unified  
Address  
Communications Manager Express with which the video phone is registered.  
Switch  
Name  
Name of the switch to which the video phone is connected.  
Switch  
Address  
IP address of the switch to which the video phone is connected.  
Switch port used by the video phone; for example, Fa0/12.  
Port  
Port Status Status of the port used by the video phone: up or down.  
VLAN  
Name  
Name of the VLAN (user-defined name); for example, voice.  
VLAN ID  
ID of the VLAN for the video phone; for example, 100.  
SRST Mode One of the following:  
yes—The phone is in SRST mode  
no—The phone is not in SRST mode  
?—The phone is suspected to be in SRST mode  
—(dash)—The phone is not an SRST phone  
SRST  
One of the following:  
Router  
IP address of the router that the phone is using for SRST  
—(dash)  
Serial No.  
IP phone serial number  
Note This information is obtained by phone polling. See Understanding Phone  
Application Identifier of the firmware running on the phone  
ID  
Note  
This information is obtained by phone polling. See Understanding Phone  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-36  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
Table 13-8  
All Video Phones/Lines Report  
Identifier of the factory-installed load running on the phone  
Load ID  
Note  
This information is obtained by phone polling. See Understanding Phone  
Launch  
button  
Click and select a menu item to configure tests for the video phones selected on this  
report.  
Generating the TelePresence Report  
The TelePresence report shows a list of the TelePresence video phone devices and the Cisco Unified IP  
Phone 7970 associated with the corresponding TelePresence system.  
Step 1  
Select Reports > Video Phones > TelePresence. The TelePresence report appears in a new window,  
displaying information for TelePresence video phone devices and the associated Cisco Unified IP Phone  
7970.For more information, see Understanding Video Phone Reports, page 13-38.  
Table 13-9  
TelePresence Report  
Columns and Buttons Description/Action  
Number  
The row number; starting from 1.  
Select phones that you would like to:  
Check box  
Print—Include selected phones in a new window in print-friendly  
Export to a file—Include selected phones in a PDF or CSV file. (See  
Extn.  
Extension number of the video phone; for example, 4000. Click the  
hyperlink to see more details of the video phone (see Opening an IP Phone  
User  
Username obtained using LDAP if you have configured an LDAP server in  
Operations Manager. See Configuring LDAP, page 16-43 and Obtaining  
IP Address  
MAC Address  
IP address of the video phone; for example, 10.76.38.65. Click the hyperlink  
to see more details of the video phone (see Opening an IP Phone Web  
MAC address of the video phone; for example, 003094c40454, or  
00-30-94-c4-04-54. Click the hyperlink to see more details of the video  
Model  
Regd.  
Model number of the video phone.  
Registration status of the video phone with respect to Cisco Unified  
Communications Manager or Cisco Unified Communications Manager  
Express. Displays yes if the video phone is registered or no if the video  
phone is not registered.  
CCM/CME Address IP address of the Cisco Unified Communications Manager or Cisco Unified  
Communications Manager Express with which the video phone is registered.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-37  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
Table 13-9  
TelePresence Report (continued)  
Columns and Buttons Description/Action  
Switch Address  
Port  
IP address of the switch to which the video phone is connected.  
Switch port used by the video phone; for example, Fa0/12.  
Generating the SRST Video Phones Report  
The SRST Video Phones report shows a list of phones that are configured for Survivable Remote Site  
Telephony (SRST).  
Step 1  
Select Reports > Video Phones > SRST Video Phones. The SRST Video Phones report appears in a  
new window, displaying information for the SRST configuration only. For more information, see  
Generating the SIP Video Phones Report  
The SIP Video Phones report shows a list of SIP video phones.  
Step 1  
Select Reports > Video Phones > SIP Video Phones. The SIP Phones report appears in a new window,  
displaying information for SIP video phones only. For more information, see Understanding Video  
Understanding Video Phone Reports  
Table 13-5 describes the data displayed in the following reports:  
Inventory Analysis—Includes phones that match criteria that you specify.  
All Video Phones/Lines—Includes all video phones, including video phones that are configured for  
SRST.  
Note  
You can filter the All Video Phones/Lines report to include only the phones that you want to  
see.  
SRST Video Phones—Includes only phones that are configured for SRST.  
SIP Video Phones—Includes only SIP video phones.  
By default, these reports display only these columns: Extension, User, IP Address, MAC Address,  
Model, Regd, CCM, Switch Address, and Port. You can hide these columns and select among additional  
Table 13-10 describes all possible columns of data that can appear on the reports.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-38  
 
     
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
Table 13-10  
Video Phone Reports  
Columns and Buttons  
Number  
Description/Action  
The row number; starting from 1.  
Select phones that you would like to:  
Check box  
Print—Include selected phones in a new window in print-friendly  
Export to a file—Include selected phones in a PDF or CSV file. (See  
Launch a test on—Include selected phones in tests that you create  
from the Launch button when it is present at the bottom of the report.  
Extn.  
Extension number of the video phone; for example, 4000. Click the  
hyperlink to see more details of the video phone (see Opening an IP Phone  
User  
Username obtained using LDAP if you have configured an LDAP server  
in Operations Manager. See Configuring LDAP, page 16-43 and Obtaining  
IP Address  
MAC Address  
IP address of the video phone; for example, 10.76.38.65. Click the  
hyperlink to see more details of the video phone (see Opening an IP Phone  
MAC address of the video phone; for example, 003094c40454, or  
00-30-94-c4-04-54. Click the hyperlink to see more details of the video  
Model  
Model number of the video phone.  
Protocol  
Protocol the phone is using to communicate with Cisco Unified  
Communications Manager or Cisco Unified Communications Manager  
Express.  
Note  
Only SCCP and SIP phones will be discovered. H.323 and MGCP  
protocols are not currently supported.  
Regd.  
CCM  
Registration status of the video phone with respect to Cisco Unified  
Communications Manager or Cisco Unified Communications Manager  
Express. Displays yes if the video phone is registered or no if the video  
phone is not registered.  
One of the following:  
CCM—Cisco Unified Communications Manager.  
CCE—Cisco Unified Communications Manager Express.  
CCM/CME Name  
CCM/CME Address  
Switch Name  
DNS name of the Cisco Unified Communications Manager or Cisco  
Unified Communications Manager Express with which the video phone is  
registered.  
IP address of the Cisco Unified Communications Manager or Cisco  
Unified Communications Manager Express with which the video phone is  
registered.  
Name of the switch to which the video phone is connected.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-39  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
Table 13-10  
Video Phone Reports (continued)  
Columns and Buttons  
Switch Address  
Port  
Description/Action  
IP address of the switch to which the video phone is connected.  
Switch port used by the video phone; for example, Fa0/12.  
Status of the port used by the video phone: up or down.  
Name of the VLAN (user-defined name); for example, voice.  
ID of the VLAN for the video phone; for example, 100.  
One of the following:  
Port Status  
VLAN Name  
VLAN ID  
SRST Mode  
yes—The phone is in SRST mode.  
no—The phone is not in SRST mode.  
?—The phone is suspected to be in SRST mode.  
—(dash)—The phone is not an SRST phone.  
SRST Router  
One of the following:  
IP address of the router that the phone is using for SRST.  
—(dash).  
Serial No.  
IP phone serial number.  
Note This information is obtained by phone polling. See Understanding  
Identifier of the firmware running on the phone.  
Application ID  
Load ID  
Note  
This information is obtained by phone polling. See Understanding  
Identifier of the factory-installed load running on the phone.  
Note  
This information is obtained by phone polling. See Understanding  
Launch button  
Click and select a menu item to configure tests for the video phones  
selected on this report.  
For more information, see the following topic:  
Filtering a Video Phones Report  
From a Video Phones report, click the Filter button when present. A filter dialog box opens.  
Note  
Filtering is performed using:  
An implicit “or” within each field—If you enter more than one value in a field, phones that match  
any value are included in the report.  
An implicit “and” for all fields—If you enter values in more than one field, phones that match at  
least one value from each field are included in the report after filtering.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-40  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
For example, if you enter two phone models, such as 7910 and 7935, in the Video Phone Model field,  
the report that results includes all phones of these models. If, in addition, you enter a VLAN ID and a  
switch, the report is filtered to include only phones of the models specified that are connected to the  
switch and in the VLAN that you selected.  
Step 1  
Enter values in one or more fields, described in the following table.  
GUI Element  
Description/Action  
Find Video Phones  
where list boxes and  
field  
From left to right:  
Select one of the following:  
Extension number  
IP Address  
MAC Address  
Then select one of the following:  
is exactly  
begins with  
contains  
ends with  
Enter a value.  
VLAN Name field  
VLAN ID field  
Enter the name of the VLAN.  
Enter the VLAN ID.  
Video Phone Status Select one:  
radio buttons  
Registered  
Unregistered  
All—Registered and unregistered phones.  
SRST radio buttons Select one:  
SRST—Configured to fail over to an SRST router in case of a WAN link  
failure.  
Non-SRST—Not configured for SRST.  
All—SRST and non-SRST.  
IP Phone Types field Enter a comma-separated list of phone types. Edit the entries in the field  
directly or select from a list of phone models, as follows:  
1. Click  
. The Select IP Phone Types list appears.  
2. Select the desired video phone types from the list. (Use the Control key or  
the Shift key to select more than one video phone type from the list.)  
3. Click OK.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-41  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
GUI Element  
Description/Action  
CCM/CME pane  
Exclude check box—Deselected by default. Select to exclude phones that  
belong to any Cisco Unified Communications Manager, Cisco Unified  
Communications Manager cluster, and Cisco Unified Communications  
Manager Express in the list box.  
List box—Enter a comma-separated list of Cisco Unified Communications  
Managers, Cisco Unified Communications Manager clusters, and  
instances of Cisco Unified Communications Manager Express, or select  
them as follows:  
1. Click  
appears.  
. The Select CCM/CCM Cluster/CME dialog box  
2. In the CCM/CCM Cluster/CME Selector, expand groups and select  
one or more instances of the following: Cisco Unified  
Communications Manager, Cisco Unified Communications Manager  
cluster, and Cisco Unified Communications Manager Express.  
3. Click OK.  
Switch pane  
Exclude check box—Deselected by default. Select to exclude phones that  
are connected to any switch in the list box.  
List box—Enter a comma-separated list of switches, or select them as  
follows:  
1. Click  
appears.  
. The Inventory Analysis Switch Selection dialog box  
2. In the Switch Selector, expand groups and select switches.  
3. Click OK.  
SRST Router pane  
Exclude check box—Deselected by default. Select to exclude phones that  
use any SRST router in the list box.  
List box—Enter a comma-separated list of switches, or select them as  
follows:  
1. Click  
appears.  
. The Inventory Analysis Router Selection dialog box  
2. In the Router Selector, expand groups and select routers.  
3. Click OK.  
Step 2  
Click OK. The filter dialog box closes and the video phone report refreshes. For more information, see  
You might not be able to see the list of Cisco Unified Communications Managers or switches in the  
popup window that appears when you click  
Do the following:  
. This occurs when the PIFServer process is down.  
Check the status of PIFServer by using the command pdshow PIFServer from the command line.  
If PIFServer is down, use the Common Services start function. To do this:  
1. From the Operations Manager home page, click CiscoWorks in the upper right-hand corner of  
the window. The CiscoWorks home page opens.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-42  
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
2. Under Common Services, select Server > Admin > Processes. The Process Management page  
appears, displaying process names in a table.  
3. Locate the PIFserver process in the table, select the check box for it, and click Start.  
Note  
Alternatively, you can bring PIFServer up using the command pdexec PIFServer from the  
command line. Use this approach if, for example, the web server is down.  
Using Video Phone Status Changes Reports  
Video Phone Status Changes reports supply information for phones that have undergone a status change  
during the previous 1 to 30 days.  
The Video Phone Audit report provides a summary of all of these changes (see Using the Video Phone  
Audit Report, page 13-44). Additional Video Phone Status Changes reports focus on particular types of  
changes, as shown in the following table.  
Phone Status Change  
Details in this Report…  
Connection—Connected to a  
different switch or switch port  
Extension number change  
Removed  
Using the Video Phone Move Report  
The Video Phone Move report displays video phones that have moved, including details about the phone  
before and after the move. The Video Phone Move report shows the time at which the video phone move  
was detected, and not the time at which the move occurred.  
Information for the Video Phone Move report is gathered every 5 minutes by Video Phone Movement  
Tracking (see Understanding IP Phone Movement Tracking, page 13-28). Video Phone Movement  
Tracking checks all the switches and Cisco Unified Communications Managers, identifies the list of  
changes, and generates the data on video phone moves.  
Note  
You obtain fresh data for the Video Phone Move report about once every 5 minutes. Close the report and  
regenerate it to refresh the data.  
Step 1  
Step 2  
Select Reports > Video Phones > Video Phone Move. The Video Phone Status Reports page appears.  
Select the time period (24 hours - 30 days) from the list and click View. The Video Phone Move report  
appears, displaying the information described in the following table.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-43  
 
   
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
Column  
Description  
Extension  
Extension number of the video phone. The Extension column has two  
subcolumns—Old and New:  
Old—Extension number of the video phone before it was moved.  
New—Extension number of the video phone after it was moved.  
IP Address  
IP address of the video phone.  
MAC Address  
CCM Address  
MAC address of the video phone.  
Cisco Unified Communications Manager address. The CCM Address column  
has two subcolumns:  
Old—CCM address of the video phone before it was moved.  
New—CCM address of the video phone after it was moved.  
Switch Address  
Switch Port  
IP address of the switch to which the video phone is connected. The Switch  
Address column has two subcolumns:  
Old—Switch address used by the video phone before it was moved.  
New—Switch address used by the video phone after it was moved.  
Switch port used by the video phone. The Switch Port column has two  
subcolumns:  
Old—Switch port used by the video phone before it was moved.  
New—Switch port used by the video phone after it was moved.  
Time Stamp  
Reflects the date and time that Operations Manager detected the video phone  
move.  
Tip  
Phones that have moved and do not run Cisco Discovery Protocol (CDP) do not appear in this report. For  
example, 30VIP and 12SP+ do not run CDP; you will not see move entries for them.  
Using the Video Phone Audit Report  
The Video Phone Audit report shows the changes that have occurred in the managed video phone  
network. For example, this report shows you the video phones that have been added to or deleted from  
your network, or changes in video phone status. Phone status changes occur, for instance, when a phone  
becomes unregistered with the Cisco Unified Communications Manager.  
You can see what has changed within the last 30 days. Audits are maintained in the database for a period  
of 30 days, after which they are purged.  
Information for the Video Phone Audit report is gathered by IP Phone Movement Tracking (see  
Understanding IP Phone Movement Tracking, page 13-28). IP Phone Movement Tracking runs every  
5 minutes, so you can run the Video Phone Audit Detail report and obtain fresh data about once every  
5 minutes. This interval is not configurable.  
Step 1  
Select Reports > Video Phones > Video Phone Audit. The Video Phone Status Reports page appears.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-44  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
Step 2  
Select the time period (24 hours - 30 days) from the list and click View. The Video Phone Audit report  
appears, displaying the information described in the following table.  
Column  
Description  
Extension  
IP Address  
MAC Address  
Extension number of the video phone.  
IP address of the video phone.  
MAC address of the video phone.  
CCM/CME Address Cisco Unified Communications Manager or Cisco Unified Communications  
Manager Express address.  
Switch Address  
Switch Port  
Time  
IP address of the switch to which the video phone is connected.  
Switch port used by the video phone.  
Time of audit on the Cisco Unified Communications Manager.  
Note  
Audit date and time are taken directly from Cisco Unified  
Communications Manager without adjustment for time zone  
differences, if any exist, between Cisco Unified Communications  
Manager and Operations Manager systems.  
Audit Type  
One of the following:  
add—Phone added to the network.  
remove—Phone removed from the network.  
unregistered—From Cisco Unified Communications Manager.  
registered—With Cisco Unified Communications Manager.  
Using the Removed Video Phones Report  
The Removed Video Phones report lists phones that have been removed during the previous 1 to 30 days.  
Operations Manager gathers the information used in this report every 5 minutes (see Understanding IP  
Phone Movement Tracking, page 13-28.) Therefore, you can run this report and obtain fresh data about  
once every 5 minutes.  
Step 1  
Step 2  
Select Reports > Video Phones > Removed Video Phones. The Video Phone Status Reports page  
appears.  
Select the time period (24 hours - 30 days) from the list and click View. The Removed Video Phones  
report appears in a new window, displaying the information described in the following table.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-45  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Using Video Phones Reports  
Column  
Description  
Extension  
Extension number of the video phone.  
IP address of the video phone.  
IP Address  
MAC Address  
MAC address of the video phone.  
CCM/CME Address Cisco Unified Communications Manager or Cisco Unified Communications  
Manager Express address.  
Switch Address  
Switch Port  
Time  
IP address of the switch to which the video phone was previously connected.  
Switch port to which the video phone was previously connected.  
Time that the phone was removed from Cisco Unified Communications  
Manager.  
Note  
Removal date and time are taken directly from Cisco Unified  
Communications Manager without adjustment for time zone  
differences, if any exist, between Cisco Unified Communications  
Manager and Operations Manager systems.  
Indication  
Indicates the Cisco Unified Communications Manager registration status of the  
video phone: removed.  
Using the Video Phone Extension Number Changes Report  
The Extension Number Changes report lists phones that have changed extension numbers during the  
previous 1 to 30 days. Operations Manager gathers the information used in this report every 5 minutes  
(see Understanding IP Phone Movement Tracking, page 13-28.) Therefore, you can run this report and  
obtain fresh data about once every 5 minutes.  
Step 1  
Step 2  
Select Reports > Video Phones > Extension Number Changes. The Video Phone Status Reports page  
appears.  
Select the time period (24 hours - 30 days) from the list and click View. The Extension Number Changes  
report appears in a new window, displaying the information described in the following table.  
Column  
Description  
Extension  
Extension number of the video phone.  
IP Address  
MAC Address  
CCM Address  
Switch Address  
Switch Port  
Time  
IP address of the video phone.  
MAC address of the video phone.  
Cisco Unified Communications Manager address.  
IP address of the switch to which the video phone was previously connected.  
Switch port to which the video phone was previously connected.  
Time that Operations Manager determined that the extension number changed.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-46  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Viewing Other Reports  
Exporting Video Phone Status Changes Reports  
Use this procedure to enable Operations Manager to generate Video Phone Status Changes reports once  
every 24 hours and store them on the Operations Manager system in comma-separated values (CSV) and  
PDF formats. The creation date and time are used to name the report files. The filename format is  
typeofreport_date_time.filetype.  
Note  
Operations Manager does not automatically purge these report files. You must remove them manually.  
Step 1  
Select Reports > Video Phones > Export. The automatically Export 24-Hour Video Phone Status  
Reports page appears, displaying the information described in the following table.  
GUI Element  
Description/Action  
Reports pane  
For each Video Phone Status Changes report that you want to generate and  
save nightly, select at least one of the following:  
CSV check box—Save the report in CSV format.  
PDF check box—Save the report in PDF format.  
Generate pane  
Save at—A default location for storing the reports on the Operations  
Manager server is displayed; you can enter another location on the server.  
E-mail to—(Optional) Enter a complete e-mail address.  
Step 2  
Click Apply.  
Viewing Other Reports  
To view Service Level or Unified CM Express View reports, access the reports via the Monitoring  
Dashboard. See Understanding Service Level and Unified CM Express Views, page 2-1 or Viewing  
Large Numbers of Devices and Clusters from the Service Level View, page 2-14.  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-47  
 
 
Chapter 13 Generating Audio Phone and Video Phone Reports  
Viewing Other Reports  
User Guide for Cisco Unified Operations Manager  
OL-19470-01  
13-48  
 

Bogen Cassette Player CPT 1B User Manual
Braun Electric Toothbrush D17511 User Manual
Brinkmann Gas Grill 810 4415 T User Manual
Cabletron Systems Tablet CSX200 User Manual
Cardiosport Marine GPS System SP3006IS02SCC User Manual
Casio Electronic Keyboard PX 780M User Manual
Casio Watch MA0702 B User Manual
Cateye Bicycle Accessories ROAD User Manual
CDA Dishwasher WF140 User Manual
Chauvet Laser Pointer Laser Pointer User Manual